Grant-in-Aid for Scientific Research (B)
|Research Institution||HAKODATE National College of Technology|
SANO Yoshifusa HAKODATE National College of Technology, Civil Engineering, Professor, 環境都市工学科, 教授 (90041897)
鈴木 恵三 (株)阪神コンサルタンツ, 部長代理(研究職)
窪田 洋司 (株)東京ソイルリサーチ, 係長(研究職)
古河 幸雄 日本大学, 工学部, 助教授
SHIMOBE Satoru NIHON university Junior College, Lecturer, 専任講師 (40149406)
KOHMOTO Tetsuya SAGA University, Faculty of Agriculture, Profeesor, 農学部, 教授 (60038304)
KAZAMA Hidehiko SAITAMA University, Faculty of Engineering, Lecturer, 工学部, 講師 (40008868)
FURUKAWA Sachio NIHON university, Faculty of Engineering, Associate Professor
SUZUKI Keizoh HANSHIN Consultants Co. Ltd., Minami Kyushu Branch, Vice Head of Exploration Sec
KUBOTA Hiroshi TOKYO Soil Research Co. Ltd., TSUKUBA Reserch Center, Chief of Technology Divisi
|Project Fiscal Year
1994 – 1996
Completed(Fiscal Year 1996)
|Budget Amount *help
¥3,000,000 (Direct Cost : ¥3,000,000)
Fiscal Year 1996 : ¥500,000 (Direct Cost : ¥500,000)
Fiscal Year 1995 : ¥800,000 (Direct Cost : ¥800,000)
Fiscal Year 1994 : ¥1,700,000 (Direct Cost : ¥1,700,000)
|Keywords||Clay / Consistency Limits / Physical Properties / 粘土 / コンシステンシー限界 / 物理的性質 / 試験法 / フォールコーン|
Views and clamors from measurement persons : Main inquiries which were excuted after preliminary ones were examined. It was cleared that measurement persons are strongly restricted by official standard, and wish urgent improvement of measurement methods because the current measurement methods have many vague parts.
Simultaneous Test Part 3 : Tests nationwide were executed by same devices under same initial state of sample, and same handling specification in detail. Indications concerning devices and measurement have great effects on reduction of variations in satisfactory level. And it is also cleared that whether measurement persons are familiar or unfamiliar with devices actually take some effects, but measurement persons will get easily accustomed to the devices and this problem will be settled without large difficulty.
It seems to be important whether precise measurement specification is equipped or not including sample preparation and handling. The specification for handling in detail which is regarded and kept sincerely does not cause differences in person.
Temporary Code : According to the simultaneous tests, sample preparation and handling are the important factors. A practical point of view, prescription on way for soil mixing is hard, and prescription on time for soil mixing is preferably acceptable. In order to get sufficient reproducibility, repeated measurement until variations become small is recommended, that is, each penetration should be within a certain variation.
Miscellaneous : References on consistency, measurement and so on, soil mixing method, one point measurement method were examined under cooperation of all members.
Final Report : Reserch terms were divided to each member, everyman wrote on the subjects. According to the discusions on the primary report, each reprt has been reexamined and final report is now in print.