Application of Infrared Image Transmission System to Industrial and Medical Measurements
| Project/Area Number |
07555419
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (A)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 試験 |
|---|
| Research Field |
電子デバイス・機器工学
|
|---|
| Research Institution | Ryukoku University |
|---|
Principal Investigator |
SAITO Mitsunori Ryukoku University, Department of Electronics and Informatics, Professor, 理工学部, 教授 (60205680)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
MIYASHITA Toyokatsu Ryukoku University, Department of Electronics and Informatics, Professor, 理工学部, 教授 (00026238)
桜木 史郎 ユニオンマテリアル(株), 研究部長
|
|---|
| Project Period (FY) |
1995 – 1996
|
| Project Status |
Completed (Fiscal Year 1996)
|
| Budget Amount *help |
¥4,700,000 (Direct Cost: ¥4,700,000)
Fiscal Year 1996: ¥4,700,000 (Direct Cost: ¥4,700,000)
|
|---|
| Keywords | optical fiber / infrared / thermometry / spectroscopy / image observation / thermal measurement |
|---|
| Research Abstract |
Remote sensors for thermometry and gas monitoring were developed by the use of infrared optical fibers. Chalcogenide glass fibers (As-S,Ge-As-Se, and Ge-As-Se-Te) and polycrystalline silver halide fibers (AgClBr) were fabricated for this purpose. Low temperature was measured accurately due to the high transparency of the fibers in the mid-infrared region. A bundle of chalcogenide glass fibers was also developed and used for the transmission of thermal images. In the experiment of gas monitoring, such gases as propane, butane, and alcohol were measured successfully by the use of a Fourier-transform infrared spectrometer. An infrared CCD camera was also used to observe the distribution of gases. It was demonstrated in this study that the infrared optical fibers are useful for remote sensing that is required in the industrial measurements and medical diagnostics.
|
Report
(3 results)
Research Products
(10 results)
