|Budget Amount *help
¥3,500,000 (Direct Cost : ¥3,500,000)
Fiscal Year 1999 : ¥1,800,000 (Direct Cost : ¥1,800,000)
Fiscal Year 1998 : ¥1,700,000 (Direct Cost : ¥1,700,000)
The job shop type production by the FMS would be introduced into the architecture field recently. However, the ability of the system cannot be demonstrated in the design method by "parts choice type". Therefore, systems of "the performance security type" in which that it ensures the performance of parts and reflects the design intention is possible are necessary.
The aims of this research are :
(1) The attribute which influences the performance of the cladding parts is divided into "the attribute for a security to do performance" and "the attribute which a designer, can establish freely", and put in order systematically.
(2) The prototype of "the cladding design support system for FMS" as designed as a result of (1)
First, the historical meaning related to part-ization of the building materials as a premise to attain a purpose, and a problem could be grasped. And, It took the case of the aluminum sash about the present condition of the design process which the part of "the choice type" was used for, and public design organization, a folks design office, a part manufacturer and investigation to the special construction dealer were done next.
Investigation to the sash manufacturer was done at the same time, and that realization possibility was argued about the part of "the performance security type".
From now on, it is necessary to examine an order form on the part manufacture side and the structure of the design support, a problem in actual manufacture, and so on toward the realization of "the performance security pattern part".