Molecular-level in-situ investigation of adhesion mechanism of colloidal particles
Grant-in-Aid for Scientific Research (B)
|Allocation Type||Single-year Grants|
|Research Institution||KYOTO UNIVERSITY|
HIGASHITIANI Ko KYOTO UNIV., CHEM.ENG., PROFESSOR, 工学研究科, 教授 (10039133)
KANDA Yoichi KYOTO UNIV., CHEM.ENG., INSTRUCTOR, 工学研究科, 助手 (60243044)
|Project Period (FY)
1997 – 1998
Completed(Fiscal Year 1998)
|Budget Amount *help
¥11,600,000 (Direct Cost : ¥11,600,000)
Fiscal Year 1998 : ¥1,700,000 (Direct Cost : ¥1,700,000)
Fiscal Year 1997 : ¥9,900,000 (Direct Cost : ¥9,900,000)
|Keywords||Atomic force microscope / Adsorbed layer / Adhesion force / Surface / Surface modification / Particle|
Interaction forces between a silica particle and a mica or silica plate are measured by using atomic force microscope. Following results are found :
<Adhesion force in non-aqueous media>
An extremely large adhesion force appears at a relative water concentration in alcohols as the water-soluble media. The similar results are found in other media having different hydrophilic group. It is considered that this adhesion force will be decided by the competition between the bridging force because of phase separation of water and the surface-active effect by media molecule itself. The result of molecular dynamics simulation has confirmed the existence of the big peak of adhesion force at a relative water concentration.
The adhesion force in alkane liquid increases extremely with existing trace amount of water and decreases with mixing alcohols by their surface-active effect. The addition of non-ionic surfactant of low HLB value invites similar results. For the surfactant of high HLB value, a lon
g-range attractive force appears and there is a steric repulsion force by their adsorbed layer near the surfaces.
<Surface property and interaction force>
The attractive force appears even between little hydrophobic surfaces in surfactant aqueous solution but does not appear between modified surfaces until contact angle becomes over 80 degree. This difference will be due to not only the difference of domain structure of adsorbed layer but also the influence of surfactant.
A hysteresis appears in the measuring of interaction force between modified surfaces by using normal continuous mode but does not appear by the measuring of static method. This suggests that so-called hydrophobic interaction force will be due to a dynamic mechanism.
Adhesion forces between mica plate and AFM probe, 4 mum silica particle or 9 mum, are similar magnitude each other. According to the investigation of AFM images, it is considered that the adhesion force will depend on rather the microscopic feature of the surface contacting each other than the macroscopic particle diameter. Less
Research Products (33results)