Project/Area Number |
09555029
|
Research Category |
Grant-in-Aid for Scientific Research (B)
|
Allocation Type | Single-year Grants |
Section | 展開研究 |
Research Field |
Materials/Mechanics of materials
|
Research Institution | Nagoya University |
Principal Investigator |
TANAKA Keisuke Nagoya University, Mechanical Engineering, Professor, 工学研究科, 教授 (80026244)
|
Co-Investigator(Kenkyū-buntansha) |
TANAKA Hiroshi Nagoya University, Res. Center for Adv. Wast and Emis. Manage., Assistant Professor, 難処理人工物研究センター, 講師 (80236629)
AKINIWA Yoshiaki Nagoya University, Mechanical Engineering, Associate Professor, 工学研究科, 助教授 (00212431)
HAYASHI Makoto Mech. Eng. Res. Lab., Hitachi Ltd., Researcher, 機械研究所, 研究員
MORII Yukio Tokai Res. Establishment, JAERI, Researcher, 材料研究部, 研究員
林 真琴 (株)日立製作所, 機械研究所, 研究員
|
Project Period (FY) |
1997 – 1999
|
Project Status |
Completed (Fiscal Year 1999)
|
Budget Amount *help |
¥12,400,000 (Direct Cost: ¥12,400,000)
Fiscal Year 1999: ¥2,000,000 (Direct Cost: ¥2,000,000)
Fiscal Year 1998: ¥1,600,000 (Direct Cost: ¥1,600,000)
Fiscal Year 1997: ¥8,800,000 (Direct Cost: ¥8,800,000)
|
Keywords | Neutron stress measurement / Residual stress / Fatigue damage / X-ray stress measurement / Elastic constant / Composite / Welding / Plastic deformation / 疲労 |
Research Abstract |
1. A method to estimate the diffraction elastic constants of engineering materials was proposed on the basis of Eshelby's inclusion mechanics combined with the self-consistent model. 2. The residual stress analyzer (RESA) was developed at the guide tube of T2-1 of the reactor, JRR-3M, at Japan Atomic Energy Research Institute (JAERI). To determine the distribution of the residual stress, an automatic devise for positioning and a bent crystal system for focusing were newly developed. 3. The stress partioning of aluminum reinforced by SiC particles agrees very well with the prediction by micromechanics. The measured values of thermal residual stresses in alumina mixed with zirconia or with silicon carbide agreed with the prediction from the mismatch of the thermal expansion coefficient by micromechanics. 4. The developed system for neutron stress measurements was successfully applied to measure the residual stress distribution in aluminum shrink fit, jacket material for ITER superconducting coil, and welded pipes. 5. The change of the residual stress was detected by neutron diffraction at the time of crack initiation in fatigue of notched carbon steel bars. The redistribution of the residual stress due to crack propagation was detected by neutron diffraction near the weld joint of stainless pipes. 6. A method was proposed toward standardization of neutron stress measurements.
|