| Project/Area Number |
09650316
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
電力工学・電気機器工学
|
|---|
| Research Institution | Sestunan University (1998)
Kyoto University (1997) |
|---|
Principal Investigator |
TAKASE Fuyuto (Setsunan University, Department of Engineering, Assoc.Prof.), 工学部・電気工学科, 助教授 (60192150)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
UEDA Yoshisuke (Kyoto University, Department of Engineering, Prof.), 工学部, 教授 (00025959)
引原 隆士 京都大学, 工学研究科, 助教授 (70198985)
|
|---|
| Project Period (FY) |
1997 – 1998
|
| Project Status |
Completed (Fiscal Year 1998)
|
| Budget Amount *help |
¥3,100,000 (Direct Cost: ¥3,100,000)
Fiscal Year 1998: ¥1,500,000 (Direct Cost: ¥1,500,000)
Fiscal Year 1997: ¥1,600,000 (Direct Cost: ¥1,600,000)
|
|---|
| Keywords | Synchronous machine / Magnetic saturation / Modeling / Iron loss / モデル化 / 継鉄 / ポ-シェインダクタンス |
|---|
| Research Abstract |
A nonlinear model is proposed representing air-gap magnetic flux density distribution in a synchronous machine with magnetic saturation in the teeth of rotor and stator. To consider saturation of teeth of iron core, the authors assume that saturatable part is distributed around air-gap. A model to express air-gap flux is derived from magnetic circuit inside of the synchronous machine. The co-saturation function is decided from the no-load saturation curve. The culculated air-gap magnetic flux distribution by this saturation model is compared with that of measured at on-load test. As a result, the culculated air-gap magnetic flux distribution from the proposed saturation model agrees well to measured one.
|
