• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

A Basic Study of Group Design System Using Kansei Databases

Research Project

Project/Area Number 09838041
Research Category

Grant-in-Aid for Scientific Research (C)

Allocation TypeSingle-year Grants
Section一般
Research Field 感性工学
Research InstitutionKure National College of Technology

Principal Investigator

NAGAMACHI Mitsuo  Kure National College of Technology, President, 校長 (50034327)

Co-Investigator(Kenkyū-buntansha) ISHIHARA Shigekazu  Onomichi Junior College, Associate Professor, 経営情報学科, 助教授 (90243625)
NISHINO Tatsuo  Hiroshima Institute of Technology, Associate Professor, 工学部, 助教授 (00104076)
ICHITSUBO Makoto  Kure National College of Technology, Associate Professor, 環境都市工学科, 助教授 (50223102)
Project Period (FY) 1997 – 1998
Project Status Completed (Fiscal Year 1998)
Budget Amount *help
¥2,900,000 (Direct Cost: ¥2,900,000)
Fiscal Year 1998: ¥1,200,000 (Direct Cost: ¥1,200,000)
Fiscal Year 1997: ¥1,700,000 (Direct Cost: ¥1,700,000)
KeywordsKansei Engineering / Collaborative work / Interface / Kansei Designing / Kansei Database / インタフェース
Research Abstract

Kansei Engineering as the ergonomic consumer-oriented product development was founded by M.Nagamachi, Professor of Hiroshima University, about 25years ago and it has prevailed in Japan as well as in the world, because the society welcomes that the manufacturers produce the product oriented to the consumers' demand and feeling. "Kansei" means the consumer's psychological feeling and image which he or she will have in mind for a coming product. Nowadays, people don't want to buy, if the products are not fit to the consumers' feeling.
Kansei Engineering is defined as "a translating technology of the consumers' feeling and image into design of the coming products'. Methods of the kansei engineering has been investigated so far, and there are five techniques ; (I) Category Classification, (2) Kansei Engineering Computer System, (3) Hybrid Kansei Engineering Compputer System, (4) Mathematica Kansei Modeling and (5) Virtual Kansei Engineering Computer System.
Collaborative Kansei Design System using Internet is the sixth technique concerning the present paper. Group Design System, in other word Collaborative Kansei Design, implies that the designers apart from each other cooperate to design a new product through the Internet which has an intelligent software to support the designing and a variety of kansei databases. The designers enable to interact each other looking face to face and talking. They can change the design with his or her intention which is transferred from the colleague (s) and finally they decide the best design with all participants consensus. We obtained the good results through the ergonomic and the Web site experiments and it is sure that the system will be utilized in business, if we can proceed more detail research.

Report

(3 results)
  • 1998 Annual Research Report   Final Research Report Summary
  • 1997 Annual Research Report
  • Research Products

    (18 results)

All Other

All Publications (18 results)

  • [Publications] M.Ichitubo et al.: "Construction of roundness database for internet kansei engineering" Manufacturing and Hybrid Automation II. 47-50 (1998)

    • Description
      「研究成果報告書概要(和文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] M.Nagamachi et al.: "Construction of form-ratio database for internet kansei engineerign" Manufacturing and Hybrid Automation II. 51-54 (1998)

    • Description
      「研究成果報告書概要(和文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] T.Nishino et al.: "Intelligent linkage between internet web browser and kansei database" Manufacturing and Hybrid Automation II. 55-58 (1998)

    • Description
      「研究成果報告書概要(和文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] M.Nagamachi: "Kansei designing group work system through internet" Manufacturing and Hybrid Automation II. 63-66 (1998)

    • Description
      「研究成果報告書概要(和文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] S.Ishihara et al.: "Kansei inference system and internet VR" Manufacturing and Hybrid Automation II. 403-406 (1998)

    • Description
      「研究成果報告書概要(和文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] M.Nagamachi et al.: "Construction of form-ratio database for internet kansei engineering" Manufacturing and Hybrid Automation II. 5l-54 (1998)

    • Description
      「研究成果報告書概要(欧文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] T.Nishino et al.: "Intelligent linkage between internet web browser and kansei databas" Manufacturing and Hybrid Automation II. 55-58 (1998)

    • Description
      「研究成果報告書概要(欧文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] M.Nagamachi: "Kansei designing group work system through internet" Manufacturing and Hybrid Automation II. 63-66 (1998)

    • Description
      「研究成果報告書概要(欧文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] S.Ishihara et al.: "Kansei inference system and internet VR" Manufacturing and Hybrid Automation II. 403-406 (1998)

    • Description
      「研究成果報告書概要(欧文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] M.Ichitubo et al.: "Construction of roundess database for internet kansei engineering" Manufacturing and Hybrid Automation. II. 47-50 (1998)

    • Related Report
      1998 Annual Research Report
  • [Publications] M.Nagamachi et al.: "Construction of form-ratio database for internet kansei engineering" Manufacturing and Hybrid Automation. II. 51-54 (1998)

    • Related Report
      1998 Annual Research Report
  • [Publications] T.Nishino et al.: "Intelligent linkage between internet web browser and kansei database" Manufactruring and Hybrid Automation. II. 55-58 (1998)

    • Related Report
      1998 Annual Research Report
  • [Publications] M.Nagamachi et al.: "Kansei designing group work system through internet" Manufacturing and Hybrid Automation. II. 63-66 (1998)

    • Related Report
      1998 Annual Research Report
  • [Publications] S.Ishihara et al.: "Kansei inference system and internet VR" Manufactruring and Hybrid Automation. II. 403-406 (1998)

    • Related Report
      1998 Annual Research Report
  • [Publications] M.Nagamachi: "Kansei designing group work system though internet" Manufucturing Agility and Hybrid Automation-II. (1998)

    • Related Report
      1997 Annual Research Report
  • [Publications] S.Ishihara,K.Ishihara,M.Nagamachi: "Kansei inference system and internet VR" Manufucturing Agility and Hybrid Automation-II. (1998)

    • Related Report
      1997 Annual Research Report
  • [Publications] M.Ichisubo,K.Komatsu: "Construction of roundness database for internet kansei designing" Construction of roundness database for internet kansei designing. (1998)

    • Related Report
      1997 Annual Research Report
  • [Publications] K.Komatsu,M.Ichitsubo: "Construction of form-ratio database for internet kansei designing" Construction of form-ratio database for internet kansei designing. (1998)

    • Related Report
      1997 Annual Research Report

URL: 

Published: 1997-04-01   Modified: 2016-04-21  

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi