Grant-in-Aid for Scientific Research (A)
|Research Institution||Tokyo Institute of Technology|
KASAI Kazuhiko Tokyo Institute of Technology, Materials & Structures Lab., Professor, 応用セラミックス研究所, 教授 (10293060)
TAMURA Tetsuro Tokyo Institute of Technology, Interdisciplinary Graduate School of Science and Engineering, Professor, 大学院・総合理工学研究科, 教授 (90251660)
MIDORIKAWA Saburo Tokyo Institute of Technology, Interdisciplinary Graduate School of Science and Engineering, Professor, 大学院・総合理工学研究科, 教授 (00143652)
黄 一華 東京工業大学, 応用セラミックス研究所, 助手 (50262324)
SAKATA Hiroyasu Tokyo Institute of Technology, Materials & Structures Laboratory, Associate Professor, 応用セラミックス研究所, 助教授 (80205749)
WADA Akira Tokyo Institute of Technology, Materials & Structures Laboratory, Professor, 応用セラミックス研究所, 教授 (90158684)
OOKI Yoji Tokyo Institute of Technology, Materials & Structures Laboratory, Research Associate, 応用セラミックス研究所, 助手 (20323842)
|Project Fiscal Year
1998 – 2001
Completed(Fiscal Year 2001)
|Budget Amount *help
¥21,950,000 (Direct Cost : ¥20,600,000、Indirect Cost : ¥1,350,000)
Fiscal Year 2001 : ¥5,850,000 (Direct Cost : ¥4,500,000、Indirect Cost : ¥1,350,000)
Fiscal Year 2000 : ¥6,500,000 (Direct Cost : ¥6,500,000)
Fiscal Year 1999 : ¥5,400,000 (Direct Cost : ¥5,400,000)
Fiscal Year 1998 : ¥4,200,000 (Direct Cost : ¥4,200,000)
|Keywords||PASSIVE CONTROL SYSTEM / PERFORMANCE EVALUATION / PERFORMANCE DESIGN / VELOCITY DEPENDENCY / DISPLACEMENT DEPENDENCY / VISCOELASTIC / VISCOUS / ELASTO-PLASTIC / 制振構造 / 性能評価 / 性能設計 / 速度依存型 / 変位依存型 / 粘弾性 / 粘性 / 弾塑性 / 等価線形化手法 / 弾塑性ダンパー / 粘弾性ダンパー / パッシブ型制振構造|
The objectives of this research program are ; to investigate performance limitations of various passive control systems considering the restraints posed by the control devices as well as frames, and ; to proposed the unified design methodology to evaluate/design the systems based on simplified response prediction method. In order to fulfill the objectives, careful dynamic experiments on the devices and systems were conducted, and the results utilized to create both detailed and simplified device analysis models, which were used to formulate and evaluate the unified design methodology. The study items are summarized below:
Deformation-Dependent Type : Formulation and validation of equivalent linearization technique, Tests of low-cycle fatigue characteristics of steel shear panel dampers, Tests and analyses of friction dampers, Evaluation of response reduction rule, Performance evaluation and design methods for single- and multi-story buildings having deformation-dependent type devices.
locity-Dependent (Linear) Type : Tests and analyses of acrylic polymer devices, Fracture prediction rules and experimental validations of the polymer devices subjected to large deformation, Performance evaluation and design methods for single- and multi-story buildings having the acrylic polymer devices.
Velocity-Dependent (Nonlinear) Type : Tests and analyses of Isobutylene and other polymer devices, Tests and analyses of silicon oil based nonlinear viscous dampers, Analysis of oil damper having relief mechanism, Performance evaluation and design methods for single- and multi-story buildings having various nonlinear velocity-dependent dampers.
Mixed-Dependency Type : Tests and analyses of Visco-Elasto-Plastic dampers, Performance evaluation and design methods for single- and multi-story buildings having Visco-Elasto-Plastic dampers.
Development of Other Passive Control Systems : Development of frame systems using bolted connections, Passive control system with stepping columns and dampers, New application of dampers for passive control of large span steel space frames as well as residential timber structures. Less