| Project/Area Number |
12650457
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
土木材料・力学一般
|
|---|
| Research Institution | Saitama University |
|---|
Principal Investigator |
OKUI Yoshiaki Saitama University, Dept. of Civil Environmental Eng., Assoc Prof., 工学部, 助教授 (40214051)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
MATSUMOTO Yasunao Saitama University, Research Assistant, 工学部, 助手 (90322023)
YAMAGUCHI Hiroki Saitama University, Professor, 工学部, 教授 (50134474)
|
|---|
| Project Period (FY) |
2000 – 2001
|
| Project Status |
Completed (Fiscal Year 2001)
|
| Budget Amount *help |
¥4,100,000 (Direct Cost: ¥4,100,000)
Fiscal Year 2001: ¥1,200,000 (Direct Cost: ¥1,200,000)
Fiscal Year 2000: ¥2,900,000 (Direct Cost: ¥2,900,000)
|
|---|
| Keywords | High damping rubber / Natural rubber / Hyper elasticity / Constitutive model / Rate dependency / Viscoelasticity / Finite strain deformation / Microstructure of rubber / Mullins効果 |
|---|
| Research Abstract |
The microstructure and the mechanical behavior of natural rubber (NR) and high damping rubber (HDR) were investigated. In this study, most of the attention was paid to the compression regime. The mechanical tests revealed the existence of Mullins' effect, strainrate dependency, hystersis and residual strain effects in all the specimens. In NR, the extent of these effects were found to have a inherent relation with the presence of microstructural voids. The presence of all these effects was also found to be significant in HDR. In addition, the strain-rate dependent high initial stiffness feature at low compressive stretch levels also became evident from the experiments. However, the microstructural observation of the current study could not explain these features of HDR. This prompted for the need of considering a phenomenological approach to reach a general constitutive model.
A constitutive model based on phenomenological motivation was introduced to model the strain-rate dependency. A
… More
n improved hyperelasticity model was proposed to represent the rate-independent elastic responses including high initial stiffness characteristics. A comparative evaluation was carried out to display the better performance of the proposed hyperelasticity model over the conventional ones. The hyperelasticity relation was incorporated in a finite deformation rate-dependent model structure. A parameter identification scheme was proposed to identify the parameters for the equilibrium and the instantaneous responses from the experimental data. The difficulties of direct application of infinitely fast or slow loading rate on such highly viscous material to obtain these responses and thereby to identify the nonlinear elastic parameters were overcome. Experimental results were extrapolated and the proposed hyperelasticity model was used. The proposed scheme was applied on three types of specimens. Numerical simulation of the test results at different deformation modes followed by sensitivity studies verified the adequacy and the robustness of the proposed model and the parameter identification scheme. Less
|
