Structure and physical property of Lithium intercalation materials
| Project/Area Number |
12793004
|
|---|
| Research Category |
Grant-in-Aid for University and Society Collaboration
|
| Allocation Type | Single-year Grants |
|---|
| Research Field |
無機工業化学
|
|---|
| Research Institution | Tokyo Institute of Technology (2001-2003)
Kobe University (2000) |
|---|
Principal Investigator |
KANNO Ryoji Tokyo Institute of Technology, Interdisciplinary Graduate School of Science and Engineering, Professor (90135426)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
KAWAMOTO Kouji Kobe University, Department of chemistry, Professor (00030776)
SAKAI Tetsuo National Institute of Advanced Industrial Science and Technology, Collaborative Research Team of Secondary, Battery System, Team Leader
TATSUMI Kuniaki National Institute of Advanced Industrial Science and Technology, Special Divirion for Green Life Technology Advanced Battery Research Group, Group Leader
TABUCHI Yoshiharu National Institute of Advanced Industriai Science and Technology, Special Division for Green Lire Technology Interfacial Ionics and Solid State Chemistry Research Group, Reserch Scientist
KAMIYAMA Takashi 東京工業大学, Institute of Material Structure Science, Associate Professor (60194982)
辰巳 国昭 産総研, 関西センター・生活環境系特別研究体, グループリーダー
小林 弘典 産総研, 関西センター・生活環境系特別研究体, 主任研究員
田渕 光春 産総研, 関西センター・生活環境系特別研究体, 主任研究員
|
|---|
| Project Period (FY) |
2000 – 2002
|
| Project Status |
Completed (Fiscal Year 2003)
|
| Budget Amount *help |
¥30,500,000 (Direct Cost: ¥30,500,000)
Fiscal Year 2002: ¥9,400,000 (Direct Cost: ¥9,400,000)
Fiscal Year 2001: ¥21,100,000 (Direct Cost: ¥21,100,000)
|
|---|
| Keywords | insertion electrode / epitaxial thin films / pulse laser deposition method / rechargeable lithium ion battery / 薄膜合成 / リチウム電池 / リチウムマンガン / カーボン / 中性子回折 / 磁性 / リチウムイオン電池 / リチウムマンガンスピネル / 酸素欠損スピネル / ハードカーボンの構造 |
|---|
| Research Abstract |
We focused basic aspect of electrode materials for lithium-ion battery. To improve the characteristics and to design new lithium battery systems, we clarified the structure-property relationships for the following subjects.
The transition metal oxide LiMO_2 (M-Ni, Co, Ni_<l-y>Co_y) with the layered rock salt structure has been studied as insertion electrode in rechargeable lithium ion battery. It is known that the disorder of lithium and transition metal sites produced in the sintering process affects the magnetic and electrochemical properties. In this study, we have investigated the relationships between the disorder and magnetic and electrochemical property using neutron diffraction and SQUID measurement.
Li_<l-∂>(Ni_<l-y>Co_y)_<1+∂>O_2 samples(∂: extent of disorder) indicated spin-glass like behavior. The spin-glass transition temperature (Tg) shifted higher with the increase in ∂. The discharge capacity also increased with the decrease in ∂. These results indicate that the disorder
… More
in LiMO_2 is correlated with the magnetic and electrochemical property.
In order to design the ideal interface of the lithium battery electrode, we attempted making single crystal thin film of LiNiO_2 and LiCoO_2 using the pulse laser deposition method. The epitaxial thin films of LiCoO_2 and LiNiO_2 were obtained, those orientation was controlled by the substrate orientation.
The deterioration of lithium manganese oxide spinet (LiMn_2O_4) during charge-discharge cycle at high temperature is a serious defect for the practical use as a lithium battery electrode. Neutron diffraction measurement of lithium manganese oxide spinet powders synthesized under various conditions was carried out before and after the high temperature storage and the. structures were refined. These results suggest dissolution of manganese ion proceeds at bulk structure as well the surface of the material. The decrease in occupancy of oxygen also supports the conclusion that the bulk structure of LiMn_2O_4 is broken by high temperature storage. Less
|
Report
(4 results)
Research Products
(16 results)
