Crystal growth of 3C-SiC on Si substrates by channel epitaxy method
| Project/Area Number |
13450012
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Applied materials science/Crystal engineering
|
|---|
| Research Institution | Kyoto Institute of Technology |
|---|
Principal Investigator |
NISHINO Shigehiro Kyoto Institute of Technology, Faculty of Engineering and Design, Professor, 工芸学部, 教授 (30089122)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
HAYASHI Yasuaki Kyoto Institute of Technology, Faculty of Engineering and Design, Associate Professor, 工芸学部, 助教授 (30243116)
|
|---|
| Project Period (FY) |
2001 – 2002
|
| Project Status |
Completed (Fiscal Year 2002)
|
| Budget Amount *help |
¥14,900,000 (Direct Cost: ¥14,900,000)
Fiscal Year 2002: ¥3,900,000 (Direct Cost: ¥3,900,000)
Fiscal Year 2001: ¥11,000,000 (Direct Cost: ¥11,000,000)
|
|---|
| Keywords | channel epitaxy / 3C-SiC / heteroepitaxial growth / selective growth / silicon carbide / cubic SiC / CVD method / vapor phase growth / 横方向成長 / エアーブリッジ構造 / ファセット成長 / ELO / SiC on Si / 立方晶 SiC / EL0 |
|---|
| Research Abstract |
This study reports on heteroepitaxial growth of 3C-SiC on Si substrate with channel epitaxy method in order to reduce the high density of defects and the strain in the 3C-SiC epilayer. It has been necessary to investigate the epitaxial growth close to the 3C-SiC/Si interface. 3C-SiC layer was grown mainly on a (111) and (100) silicon substrates by using Si2(CH3)6 (Hexamathyldisilane : HMDS). The diameter of each 3C-SiC island depended on the temperature of CVD growth at an early stage of epitaxial growth of 3C-SiC on Si substrate.
Three-dimensional fine structures were formed by using "micro-channel epitaxy (MCE)". It was important to parepare the line and space structures by Reactive Ion Etching method. Line and space interval is a key to obtain good channel epitaxy. The crystallinity of formed in MCE became like polycrystalline without the control of nucleation and growth. This result may be improved by close control of experimental parameters at initial stage of 3C-SiC grown on Si substrates. T-shape pattern was formed on the Si(100) substrate and this structure was effective to get channel epitaxy. In this case, we call this shape as vertial channel epitaxy. Epitaxial layer was grown on the top of T-shape area not from the channel in the Si substrate. Carbonization was a key to obtain smooth epi-layer on the T-shape plate. Once epilayers extends nicely on the T-shape area, those layers coalescences to neighbor epilayer. Coalescenced region was examine by TEM. Annihilation of defects should be studied in detail.
|
Report
(3 results)
Research Products
(17 results)
