| Project/Area Number |
13450284
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Structural/Functional materials
|
|---|
| Research Institution | Tokyo Institute of Technology |
|---|
Principal Investigator |
KATO Masaharu Interdisciplinary Graduate School of Science and Engineering, Department of Materials Science and Engineering, Professor, 大学院・総合理工学研究科, 教授 (50161120)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
FUJII Toshiyuki Interdisciplinary Graduate School of Science and Engineering, Department of innovative and Engineered Materials, Associate Professor, 大学院・総合理工学研究科, 助教授 (40251665)
ONAKA Susumu Interdisciplinary Graduate School of Science and Engineering, Department of Innovative and Engineered Materials, Associate Professor, 大学院・総合理工学研究科, 助教授 (40194576)
KUMAI Shinji Interdisciplinary Graduate School of Science and Engineering, Department of Materials Science and Engineering, Associate Professor, 大学院・総合理工学研究科, 助教授 (00178055)
|
|---|
| Project Period (FY) |
2001 – 2003
|
| Project Status |
Completed (Fiscal Year 2003)
|
| Budget Amount *help |
¥14,800,000 (Direct Cost: ¥14,800,000)
Fiscal Year 2003: ¥1,000,000 (Direct Cost: ¥1,000,000)
Fiscal Year 2002: ¥8,800,000 (Direct Cost: ¥8,800,000)
Fiscal Year 2001: ¥5,000,000 (Direct Cost: ¥5,000,000)
|
|---|
| Keywords | copper / aluminum / fatigue / cyclic deformation / dislocation structure / precipitates stacking fault energy / cross slip / 交差すべり / すべり線 / 転位組織発達過程 / 純アルミニウム単結晶 / セル組織 / 変形の局在化 / 純銅単結晶 / persistent slip band組織 / 転位組織図 |
|---|
| Research Abstract |
Strain-controlled cyclic deformation tests for pure Cu, Cu alloys, A1 and A1 alloys (mostly single crystals) were conducted. Although the crystal structure of these metals and alloys are all fcc, the fatigue behavior was quite different. For example, pure Cu showed cyclic hardening to saturation, whereas pure Al showed hardening followed by distinct softening. Observation of dislocation microstructure has revealed that the PSB ladder structure develops in Cu and it is absent in Al. Through extensive investigation, it has been found that the differences in both the fatigue behavior and microstructure can be explained by the relative feasibility of cross slip that is determined by the magnitude of stacking fault energy. Furthermore, from experiments using a Cu-Fe alloy with dispersed small Fe precipitate particles in Cu, it has been found that the Fe particles are effective in preventing the development of fatigue dislocation structure. With this knowledge, dislocation structure diagrams that indicate fatigue dislocation structure as a function of size and distribution of second-phase particles were successfully constructed.
Dislocation structures developed during fatigue tests are found to be much more stable (both thermally and mechanically) compared with those developed after cold rolling. Owing to the to-and-fro motion during cyclic deformation, dislocations arrange themselves into an energetically stable configuration resulting in the formation of characteristic fatigue microstructures that eventually lead to fatigue failure.
In conclusion, we could obtain various new results and findings, most of which are very valuable for life assessment of structural materials.
|
