| Project/Area Number |
14550073
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Materials/Mechanics of materials
|
|---|
| Research Institution | Nagoya University |
|---|
Principal Investigator |
MIZUNO Koji Nagoya University, Graduate School of Engineering, Associate Professor, 工学研究科, 助教授 (80335075)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
MIKI Kazuo Toyota Central R&D Labs, Research Domain 16, Principal Researcher, 第16研究領域, 主席研究員
YAMAMOTO Sota Nagoya University, Graduate School of Engineering, Research Associate, 工学研究科, 助手 (80293653)
TANAKA Eiich Nagoya University, Graduate School of Engineering, Professor, 工学研究科, 教授 (00111831)
|
|---|
| Project Period (FY) |
2002 – 2003
|
| Project Status |
Completed (Fiscal Year 2003)
|
| Budget Amount *help |
¥3,700,000 (Direct Cost: ¥3,700,000)
Fiscal Year 2003: ¥600,000 (Direct Cost: ¥600,000)
Fiscal Year 2002: ¥3,100,000 (Direct Cost: ¥3,100,000)
|
|---|
| Keywords | Traffic injury / Pediatric injury / Biomechanics / Finite element analysis / Child restraint system / Crash safety / Scaling / インパクトバイオメカニクス / 子供の外傷 / 有限要素法 |
|---|
| Research Abstract |
There are various types of child restraint systems (CRS) such as five point harness, impact shield and child vest. In the regulation, child dummies are used to evaluate CRS performance. However, the shapes and characteristics of the rib cage or pelvis of dummies are different from those of the human body. Therefore, the injuries to the thorax or abdomen due to compression from restraints are difficult to evaluate in detail using crash dummies. In the present research, a 3-year-old (3YO) child human finite element (FE) model has been developed by scaling from a Total Human Model for Safety (THUMS) AM50 human FE model.
The child human FE model was validated based on the requirements of 3YO child dummy certification tests. The pendulum was impacted against the thorax. The force of the human FE model has a plateau area, which is closer to the corridor scaled from AM50 cadaver responses. Lumbar spine flexion test was performed, and the force was 160 kN at 45 degree torso flexion angle, which also satisfied the requirement. The model met the requirements of thorax impact and lumbar spine flexion of a Hybrid III crash dummy.
An ECE R44 sled test was simulated using the human FE model with shield-type CRS, and results were compared to the test using Hybrid III. The Hybrid III torso flexed at the lumbar spine since it has a stiff thorax spine box without joints. For the human FE model, the whole thorax flexed around the impact shield. The results demonstrated that the FE model can show more human-like behavior than Hybrid III. Potential injuries due to various CRS can be evaluated by the human FE model.
|
