Virtual Improvement for quick commissioning of Production Systems
| Project/Area Number |
14550110
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
機械工作・生産工学
|
|---|
| Research Institution | Waseda University |
|---|
Principal Investigator |
TAKATA Shozo Waseda University, School of Science and Engineering, Department of Industrial and Management Systems Engineering, Professor, 理工学部, 教授 (50120340)
|
|---|
| Project Period (FY) |
2002 – 2003
|
| Project Status |
Completed (Fiscal Year 2003)
|
| Budget Amount *help |
¥3,500,000 (Direct Cost: ¥3,500,000)
Fiscal Year 2003: ¥1,000,000 (Direct Cost: ¥1,000,000)
Fiscal Year 2002: ¥2,500,000 (Direct Cost: ¥2,500,000)
|
|---|
| Keywords | Virtual Improvement / Manual Assembly Operations / Computer Mannequin / Virtual Manufacturing / 工程設計 / CAD / 生産システム / 生産モデリング |
|---|
| Research Abstract |
Kaizen activities are important to improve productivity in the manual assembly operations. However, Kaizen after the production line has been put into operation could not bring about a significant improvement because of short product life cycles in recent years. It is, therefore, effective to achieve kaizen before the startup using the 3D modeling technique. We call such activities virtual improvements. In this study, the procedure of the virtual improvement based on a computer mannequin is proposed and a system to support the virtual improvement is developed. The procedure consists of an initial modeling phase and a model improvement phase. In the initial modeling phase, the system automatically generates human operation models based on the optimization of part tool arrangement. Using this model, the system evaluates human operations in terms of operational difficulty, and suggests points to be improved. The effectiveness of the system is verified using an example of automobile part assembly operations.
|
Report
(3 results)
Research Products
(11 results)
