Basic study for the fabrication of all solid lithium battery
| Project/Area Number |
15350120
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Inorganic industrial materials
|
|---|
| Research Institution | Tokyo Institute of Technology |
|---|
Principal Investigator |
KANNO Ryoji Tokyo Institute of Technology, Interdisciplinary Graduate School of Science and Engineering, Professor, 大学院・総合理工学研究科, 教授 (90135426)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
YAMADA Atsuo Tokyo Institute of Technology, Interdisciplinary Graduate School of Science and Engineering, Associate Professor, 大学院・総合理工学研究科, 助教授 (30359690)
SONOYAMA Noriyuki Tokyo Institute of Technology, Interdisciplinary Graduate School of Science and Engineering, Assistant Professor, 大学院・総合理工学研究科, 助手 (50272696)
|
|---|
| Project Period (FY) |
2003 – 2005
|
| Project Status |
Completed (Fiscal Year 2005)
|
| Budget Amount *help |
¥15,000,000 (Direct Cost: ¥15,000,000)
Fiscal Year 2005: ¥2,800,000 (Direct Cost: ¥2,800,000)
Fiscal Year 2004: ¥4,800,000 (Direct Cost: ¥4,800,000)
Fiscal Year 2003: ¥7,400,000 (Direct Cost: ¥7,400,000)
|
|---|
| Keywords | Lithium Battery / All Solid state battery / Thio-LISICON / Epitaxial film / In-situ measurement / インターカレーション反応 / リチウム電池材料 / リチウムインターカレーション反応 |
|---|
| Research Abstract |
All-solid state lithium secondary batteries are strongly desired as novel power sources with high performances because these solvent-free systems have higher safety and higher reliability than conventional lithium secondary batteries with liquid electrolytes. Thio-LISICON (LIthium SuperIonic CONductor), Li4-x Gel-x Px S4 is one of the best lithium ion conductive solids ever found in inorganic materials, and has sufficiently high conductivity, transport number, decomposition potential and thermal stability for practical use in battery. The purpose of the present study is to develop the all solid-state battery having excellent charge-discharge performance at high current density, and to characterize the interfacial behavior at various anode/electrolyte interfaces. The solid electrolyte interface (SEI) was found at Li-Al alloy/Li3.25Ge0.25P0.75S4 interface by x-ray diffraction pattern, x-ray photoelectron spectroscopy, ac impedance, and scanning electron microscopy. The SEI allowed the fastest electrochemical reaction between the anode and the electrolyte during charge-discharge process.
The surface reaction and reaction mechanism of the lithium intercalation electrodes were studied using epitaxial cathode films of LiMO_2 (M=Co, Ni) and LiMn_2O_4 oxides with the layered rock-salt type and the spinel structure, respectively. The electrode films were successfully deposited on single crystal SrTiO_3 substrates by PLD method. The orientation of the epitaxial films was controlled with the substrate orientation. The anisotropic characteristics of lithium intercalation reaction and surface reaction for their cathode materials were clarified by in-situ synchrotron X-ray diffraction and reflectivity measurements in beam-line 14B1 at SPring-8.
|
Report
(4 results)
Research Products
(23 results)
-
-
[Journal Article] Synthesis, structure, and electrochemical properties of epitaxial perovskite La_<0.8>Sr_<0.2>CoO_3 film on YSZ substrate.2006
Author(s)
D.Mori, H.Oka, Y.Suzuki, N.Sonoyama, A.Yamada, Kanno, Ryoji, Y.Sumiya, N.Imanishi, Y.Takeda.
-
Journal Title
Solid State Ionics 177(5-6)
Pages: 535-540
Related Report
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
