Study on Inspection of Void in Concrete by Impact Test
| Project/Area Number |
15K05869
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Multi-year Fund |
|---|
| Section | 一般 |
|---|
| Research Field |
Dynamics/Control
|
|---|
| Research Institution | Osaka City University |
|---|
Principal Investigator |
Kawai Tadao 大阪市立大学, 大学院工学研究科, 教授 (20177637)
|
|---|
| Project Period (FY) |
2015-04-01 – 2018-03-31
|
| Project Status |
Completed (Fiscal Year 2017)
|
| Budget Amount *help |
¥4,810,000 (Direct Cost: ¥3,700,000、Indirect Cost: ¥1,110,000)
Fiscal Year 2017: ¥1,690,000 (Direct Cost: ¥1,300,000、Indirect Cost: ¥390,000)
Fiscal Year 2016: ¥2,470,000 (Direct Cost: ¥1,900,000、Indirect Cost: ¥570,000)
Fiscal Year 2015: ¥650,000 (Direct Cost: ¥500,000、Indirect Cost: ¥150,000)
|
|---|
| Keywords | 打撃試験 / コンクリート構造物 / 浮き / 独立成分分析 / 位置推定 |
|---|
| Outline of Final Research Achievements |
We investigated the method of detecting a void in the concrete structure by the impact test. The shock waves generated by hitting the concrete propagates along a surface and through the inside of a concrete. Sensors placed on several locations apart from the impact point measure both a surface wave and a wave passing through internal concrete. We separated a internal wave from a surface wave by the method of the independent component analysis to detect a void.
At first, we checked the effectiveness of the method by simulation. Then we made a test system. Our system was composed of a impact part and sensor parts. At a impact part, a steel ball was shot by a spring to a concrete surface. At sensor parts, a small block attached an acceleration sensor was pressed to a concrete surface by a heavy mass. By this way, high frequency components of a shock wave were measured. At last, our test equipment showed a good performance to detect a void in a concrete structure.
|
Report
(4 results)
Research Products
(1 results)
