Laser Cutting of Functional Materials by Twin Laser Beam and Thermal Stress Analysis
| Project/Area Number |
16360050
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Materials/Mechanics of materials
|
|---|
| Research Institution | Nagaoka University of Technology |
|---|
Principal Investigator |
MUTOH Yoshiharu Nagaoka University of Technology, Department of System Safety, Professor, 技術経営研究科, 教授 (00107137)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
MIYASHITA Yukio Nagaoka National College of Technology, Department of Mechanical Engineering, Associate Professor, 機械工学科, 助教授 (00303181)
|
|---|
| Project Period (FY) |
2004 – 2006
|
| Project Status |
Completed (Fiscal Year 2006)
|
| Budget Amount *help |
¥15,100,000 (Direct Cost: ¥15,100,000)
Fiscal Year 2006: ¥2,500,000 (Direct Cost: ¥2,500,000)
Fiscal Year 2005: ¥2,700,000 (Direct Cost: ¥2,700,000)
Fiscal Year 2004: ¥9,900,000 (Direct Cost: ¥9,900,000)
|
|---|
| Keywords | Laser cutting / Twin beam / Functional Materials / Thermal stress analysis / ぜい性材料 / レーザ / 割断加工 / 熱応力 / ガラス / 加工 / 破壊力学 / 熱伝導解析 |
|---|
| Research Abstract |
1.According to the laser cutting experiment, crack growth direction was going to out of the laser scanning line when the direction of the laser changed regardless of the angle.
2.Crack growth direction was predicted by FEM analysis with the maximum tangential stress theory. Result of the analysis showed good agreement with that of the experiment.
3.It could be possible to control crack growth direction by controlling laser scanning direction according to the result of FEM analysis. However, control of laser scanning direction is complicate and it is difficult to predict a crack growth direction.
4.Appling a twin laser beam placed forward and following of the crack tip with in parallel to the laser scanning line is effective to control the crack growth direction according to the result of FEM analysis. Crack growth direction could change by the beam intensity ratio between two beams and the position of the following beam.
5.Twin laser beam head was developed by using a prism to sprit a laser beam. This method is simple and easy way to obtain twin laser beam. By adding the control system for the position of a prism in the laser head, it could be possible to cut the complicated shape based on the result of FEM analysis.
6.Crack initiation behavior was studied by using the specimen without a starter notch. Crack may earlier initiates when the defocusing distance is small.
7.Stress distribution was steep in case of defocusing distance is small according to the results of FEM analysis. Crack unstably propagated with the condition.
|
Report
(4 results)
Research Products
(26 results)
-
-
[Journal Article] ガラスのレーザ割断における試験片端部粗さの影響2007
Author(s)
平原和哉, 宮下幸雄, 近藤俊美, Supamard Sujatanond, Rattana Borrisutthekul, 武藤睦治
-
Journal Title
日本機械学会北陸信越学生会第36回学生員卒業研究発表講演会講演論文集
Pages: 49-49
Description
「研究成果報告書概要(和文)」より
Related Report
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
