Structural control and self-organization of the functional oxide films formed on titanium
| Project/Area Number |
16360353
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Material processing/treatments
|
|---|
| Research Institution | HOKKAIDO UNIVERSITY |
|---|
Principal Investigator |
HABAZAKI Hiroki Hokkaido Univ., Grad.School of Eng., Professor, 大学院工学研究科, 教授 (50208568)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
FUSHIMI Koji Hokkaido Univ., Grad.School of Eng., Instructor, 大学院工学研究科, 助手 (20271645)
KONNO Hidetaka Hokkaido Univ., Grad.School of Eng., Professor, 大学院工学研究科, 教授 (50002316)
|
|---|
| Project Period (FY) |
2004 – 2006
|
| Project Status |
Completed (Fiscal Year 2006)
|
| Budget Amount *help |
¥10,900,000 (Direct Cost: ¥10,900,000)
Fiscal Year 2006: ¥1,700,000 (Direct Cost: ¥1,700,000)
Fiscal Year 2005: ¥3,400,000 (Direct Cost: ¥3,400,000)
Fiscal Year 2004: ¥5,800,000 (Direct Cost: ¥5,800,000)
|
|---|
| Keywords | titanium / anodic oxide film / porous film / dielectric film / spark anodizing / self-organization / wear resistance / crystallization / 多孔質 / 誘電体酸化膜 / バルブ金属 / アノード酸化 / 誘電体 / 合金化 / 酸素ガス発生 / 固体キャパシタ |
|---|
| Research Abstract |
1.Formation of self-organized porous anodic oxide
We have successfully developed self-organized porous anodic oxide films on Ti-Si alloys in hot glycerol solution containing dibasic phosphate. The key issue for the formation of the porous films is suppression of the crystallization of anodic oxide, which induces gas evolution during anodic film growth. The similar porous films are also developed on niobium and aluminum substrates. The cell size of the porous films on aluminum is dependent upon the formation voltage, similar to those formed in acid aqueous solutions.
2.Formation of barrier-type anodic oxide with excellent dielectric properties
Incorporation of foreign species from substrate suppresses effectively the development of crystalline anodic oxide on titanium. By increasing alloying element content, the structure of the air-formed film present before anodizing is modified, such that growth of amorphous oxide continues to higher formation voltages. The compositional dependence of the dielectric properties of anodic oxides formed on a range of titanium alloys has been examined systematically.
3.Hard coating of titanium alloys by spark anodizing
Spark anodizing of titanium, Ti-6Al-4V and Ti-15V-3Al-3Cr-3Sn has been performed in alkarine electrolyte containing aluminate and phosphate. Highly crystalline Al2TiO5-based oxide coatings,〜20μm thick, have been developed by dc-biased ac anodizing to high voltages. Regardless of the materials used, the coatings with hardnes of 〜6GPa have been obtained. The coatings have porosity, associated with discharge channel. From optical measurements during spark anodizing, the temperature at the discharge region has been estimated to be 4500〜5000℃. Such high temperature allows us to develop the highly crystalline coatings with high concentration of electrolyte species even in an aqueous solution at ambient temperature.
|
Report
(4 results)
Research Products
(35 results)
