High Density-Low Truss NFT Tomato Production System with Quantitative Nutrient Management
Project/Area Number |
16380021
|
Research Category |
Grant-in-Aid for Scientific Research (B)
|
Allocation Type | Single-year Grants |
Section | 一般 |
Research Field |
Horticulture/Landscape architecture
|
Research Institution | Chiba University |
Principal Investigator |
MARUO Toru Chiba University, Faculty of Horticulture, Associate Professor, 園芸学部, 助教授 (20143266)
|
Co-Investigator(Kenkyū-buntansha) |
HOHJO Masaaki Chiba University, Faculty of Horticulture, Associate Professor, 助教授 (90110296)
|
Project Period (FY) |
2004 – 2006
|
Project Status |
Completed (Fiscal Year 2006)
|
Budget Amount *help |
¥15,700,000 (Direct Cost: ¥15,700,000)
Fiscal Year 2006: ¥2,100,000 (Direct Cost: ¥2,100,000)
Fiscal Year 2005: ¥4,700,000 (Direct Cost: ¥4,700,000)
Fiscal Year 2004: ¥8,900,000 (Direct Cost: ¥8,900,000)
|
Keywords | Lycopersicon esculentum / modified NFT / quantitative nutrient management / closed-recirculating system / low concentration nutrients / hydroponics / growth control / 養液栽培 / 培養液管理法 / NFT / トマト / 日射比例 / 周年栽培 / 冷房 / 排液率 / キャピラリー |
Research Abstract |
We developed the quantitative nutrient management (QNM) at low nutrient concentration technique using light dependent control and modified NFT system for high-density low-truss year-round tomato production system. In high-density tomato production system, the growth control to get compact and thick leaf system is very important technique for high productivity. The beneficial effects of our developed system were easy to control the growth of tomato plants (resulted in more stable and high yield), to support easy crop management (from short plant height), to uniform load of working (from multi-crop culture) and to reduce the emission of nutrients through the solution renewing process (resulted in environmentally friendly cultivation). Tomato seedlings with limited volume of growing media (RW granule) were planted in a closed NFT system in which channels were modified through the addition of a steep sloped section along the short axis of channel besides conventional slope along long axis. This modification accommodated low nutrient concentrations to uniform cultivation by reducing upstream-downstream gradients of nutrient concentrations. With QNM technique using light dependent control, the preset amount of nutrient (0.2 to 0.4me・plant^<-1>・MJ^<-1>・m^2) was supplied when the cumulative solar radiation (CSR) reached to given MJ・m^<-2> value. The preset amount was increased gradually (for instance 0.2-0.4me・plant^<-1>・MJ^<-1>-m^2) with the process of growth stage. Tomato was topped two leaves above the third truss. After the harvest of third truss, next crop started immediately and 3 to 3.5crops per year were realized. The estimated yield was near to 300t・-ha^<-1> with QNM using light dependent control.
|
Report
(4 results)
Research Products
(10 results)