Multiple analyses on mechanisms of root fracture in endodontically treated teeth
| Project/Area Number |
16390546
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Conservative dentistry
|
|---|
| Research Institution | Osaka University |
|---|
Principal Investigator |
HAYASHI Mikako Osaka University, Dental Hospital, Associate Professor, 歯学部附属病院, 講師 (40271027)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
TAKESHIGE Fumio Osaka University, Dental Hospital, Associate Professor, 歯学部附属病院, 講師 (60206969)
IWAMI Yukiteru Osaka University, Graduate School of Dentistry, Assistant Professor, 大学院歯学研究科, 助手 (90303982)
|
|---|
| Project Period (FY) |
2004 – 2006
|
| Project Status |
Completed (Fiscal Year 2006)
|
| Budget Amount *help |
¥13,600,000 (Direct Cost: ¥13,600,000)
Fiscal Year 2006: ¥3,600,000 (Direct Cost: ¥3,600,000)
Fiscal Year 2005: ¥3,700,000 (Direct Cost: ¥3,700,000)
Fiscal Year 2004: ¥6,300,000 (Direct Cost: ¥6,300,000)
|
|---|
| Keywords | post-core restoration / root fracture / fatigue fracture / fractography / resin composite / ceramics / fiber post / endodontically treated teeth / 水中環境 / 亀裂進展 / フラクトグラフィー / レジンコア / 接着性レジンセメント / 破壊抵抗性 |
|---|
| Research Abstract |
Extracted human upper premolars were restored with a fiber post, prefabricated metallic post or cast metallic post-core. Teeth with full crown preparations without post-core restorations served as a control. All teeth were restored with full coverage crowns. A 90-degree vertical or 45-degree oblique load was applied to the restored teeth with a crosshead speed of 0.5 mm/min, and the fracture loads and mode of fracture were recorded. Fatigue fracture tests were conducted by applying sinusoidal cyclic loads to restored teeth from vertical or oblique directions. Fatigue limits for each restoration were calculated using the staircase approach.
Under the condition of vertical loading, the fracture load of teeth restored with the cast metallic post-cores was greatest among the groups. All fractures in teeth restored with all types of post-core systems propagated in the middle portions of roots, including the apices of the posts. Under the condition of oblique loading, the fracture load of teeth restored with pre-fabricated metallic posts was significantly smaller than that in other groups. Two-thirds of fractures in the fiber post group propagated within the cervical area, while most fractures in other groups extended beyond the middle of the roots. Fatigue fracture resistance of teeth with different restoration methods presented identical patterns in static fracture resistance tests. Fatigue limits of teeth restored with fiber and metallic posts presented 73% of static fracture loads under vertical loading, and 48 and 46% under oblique loading.
From the results of the present investigations, it was concluded that under conditions of vertical and oblique loadings, the combination of a fiber post and composite resin core with a full cast crown is most protective to the remaining tooth structure.
|
Report
(4 results)
Research Products
(24 results)
