Synchronization and Stability of a 6 Power-Roller Half-Toroidal CVT
| Project/Area Number |
16560115
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Design engineering/Machine functional elements/Tribology
|
|---|
| Research Institution | Yokohama National University |
|---|
Principal Investigator |
TANAKA Hirohisa Yokohama National University, Graduate School of Mechanical Engineering, Professor, 大学院・工学研究院, 教授 (90092262)
|
|---|
| Project Period (FY) |
2004 – 2005
|
| Project Status |
Completed (Fiscal Year 2005)
|
| Budget Amount *help |
¥4,100,000 (Direct Cost: ¥4,100,000)
Fiscal Year 2005: ¥2,100,000 (Direct Cost: ¥2,100,000)
Fiscal Year 2004: ¥2,000,000 (Direct Cost: ¥2,000,000)
|
|---|
| Keywords | Machine element / Power transmission / Continuously Variable Transmission / Traction drive / Automobile / Toroidal / Speed ratio control / ハーフトロイダル / ボンドグラフ / 自動車用CVT / 電子油圧制御 |
|---|
| Research Abstract |
Upgrading both torque-capacity and downsizing are continuous issues for a half toroidal CVT. A 340Nm half-toroidal double-cavity CVT with 4 power rollers of 40mm in cavity radius was put into market in 1999. Following to this success, a challenge for transmitting higher torque with smaller size has been started. The design goal is set up to transmit 430Nm torque by using 6 power rollers of 36.5mm in radius instead of the conventional 4 rollers. This type of CVT has two features. One is mount-ability in a limited space of floor tunnel for a rear drive car by changing cross-sectional view from rectangular to circular ; and the other is reduction of non-uniform elastic deformation of the discs by contacting at three points on high torque transmission. This CVT has new scientific and design issues on equal torque transmission among 6 power rollers and stability of speed ratio control mechanism. This report presents the synchronizing mechanism and the stability analysis of these 6 power rollers by using bond graphs, and also measurement of efficiencies.
|
Report
(3 results)
Research Products
(6 results)
