Topological Study of the Compressible Rotating Flows
| Project/Area Number |
16560147
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Fluid engineering
|
|---|
| Research Institution | Okayama University |
|---|
Principal Investigator |
YANASE Shinichiro Okayama University, Department of Energy Systems Division of Industrial Innovation Sciences School of Natural Science and Technology, Professor of Department of Energy Systems (20135958)
|
|---|
| Project Period (FY) |
2004 – 2007
|
| Project Status |
Completed (Fiscal Year 2007)
|
| Budget Amount *help |
¥3,220,000 (Direct Cost: ¥3,100,000、Indirect Cost: ¥120,000)
Fiscal Year 2007: ¥520,000 (Direct Cost: ¥400,000、Indirect Cost: ¥120,000)
Fiscal Year 2006: ¥500,000 (Direct Cost: ¥500,000)
Fiscal Year 2005: ¥1,000,000 (Direct Cost: ¥1,000,000)
Fiscal Year 2004: ¥1,200,000 (Direct Cost: ¥1,200,000)
|
|---|
| Keywords | Coriolis Force / Centrifugal Force / Spectral Method / Vortical Structure / Cyclonic / Duct Flows / Internal Flows / サイクロニック渦 / 閉領域回転流 / コリオリ力 / コリオワカ |
|---|
| Research Abstract |
There are two main topics achieved n the present research
1. Uniformly sheared turbulent flows
The structure and dynamic of coherent vortex tubes in the zero-absolute-vorticity state (ZAVS), which is realized in a rotating uniform shear flow with zero mean absolute vorticity, are investigated by the use of the results of a direct numerical simulation. A coherent vortex tube consists of two parts, one is the two end parts and the other is a rather uniform intermediate part between two ends. The generation of Reynolds shear stress is activated in the regions near the end parts. The end parts also play a role to sustain the Reynolds stress in the central part of the vortex tube by maintaining its inclination angle.
2. Rotating flows in a dosed domain
The silicon wafer washer includes the process spouting the cleaning solution with wafer rotating. This process causes the problem of droplet corrodes the non-protected wafer backside. There are two reasons. For clearing out this mechanism, the fluid in the washer was analyzed with FLUENT the universal CFD code. In the 2D liquid film analysis, it is revealed that the wall adhesion power, the surface tension, and the shape of the wafer corner caused the liquid film turning around.
|
Report
(5 results)
Research Products
(24 results)
-
-
-
[Journal Article] 流れの遷移とカオス2007
Author(s)
柳瀬眞一郎
-
Journal Title
日本機械学会論文集(B編) 73巻728号
Pages: 909-915
NAID
Description
「研究成果報告書概要(和文)」より
Related Report
Peer Reviewed
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
