Project/Area Number |
17360217
|
Research Category |
Grant-in-Aid for Scientific Research (B)
|
Allocation Type | Single-year Grants |
Section | 一般 |
Research Field |
Structural engineering/Earthquake engineering/Maintenance management engineering
|
Research Institution | Nagasaki University |
Principal Investigator |
MATSUDA Hiroshi Nagasaki University, Faculty of Engineering, Professor, 工学部, 教授 (20157324)
|
Co-Investigator(Kenkyū-buntansha) |
MORITA Chihiro Nagasaki University, Graduate School of Science and Technology, Associate Professor, 生産科学研究科, 助教授 (60230124)
NAKAMURA Shozo Nagasaki University, Faculty of Engineering, Associate Professor, 工学部, 助教授 (40315221)
ITOH Yukihiro Saga University, Faculty of Science & Engineering, Associate Professor, 理工学部, 助教授 (90223198)
UCHINO Masakazu Fukuoka Industrial Technology Center, Researcher, 機械電子研究所, 研究員 (30416507)
GODA Hiroki Kyushu Institute of Technology, Faculty of Engineering, Research Associate, 工学部, 助手 (20346860)
|
Project Period (FY) |
2005 – 2006
|
Project Status |
Completed (Fiscal Year 2006)
|
Budget Amount *help |
¥16,100,000 (Direct Cost: ¥16,100,000)
Fiscal Year 2006: ¥3,400,000 (Direct Cost: ¥3,400,000)
Fiscal Year 2005: ¥12,700,000 (Direct Cost: ¥12,700,000)
|
Keywords | speckle pattern interferometry / digital correlation imaging method / flat-bed scanner / optical full-field measurement / 3D shape measurement / FEM analysis / seismic response analysis / nondestructive test / スペックルパターン干渉計測 |
Research Abstract |
By using of the optical full-field measurement techniques such as three dimensionally laser scanner, flat-bed imaging scanner, three dimensionally photogrametry, speckle and holographic interferometry measurement and digital imaging correlation measurement, deteriorative mechanism of construction structures which constitutes with steel, concrete, membrane and composite materials etc. have been full-field measured, and their deteriorative mechanism have been elucidated. And then the applicability to nondestructive test and diagnostic method for maintenance of construction structures of optical full-field measurement techniques have been studied. Detail are as follow, (1) Measurement of resisual stress of steel member and measurement and analysis of crack propagating of welded steel member (2) Measurement of vibration and stress of anisotropic FRP plates and the application for defect detection such as adhesion failure (3) Measurement and analysis of generation and configuration of wrinkle of tensioned membrane (4) Measurement and analysis of compressive failure test of the epoxy resin specimens (5) Measurement and analysis of shrinkage and thermal cracks among cure process of concrete (6) Elucidation of deteriorative mechanism of concrete by Arkali Silica Reaction simulation test (7) Three dimensionally measurement of large scale structures and its application to seismic diagnosis by static and dynamic analysis, and pursuit of possibilities for the structural health monitoring
|