High-temperature high performance surface coatings for thermal energy reflection
| Project/Area Number |
17360330
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Composite materials/Physical properties
|
|---|
| Research Institution | The University of Tokyo |
|---|
Principal Investigator |
KAGAWA Yutaka The University of Tokyo, Center for Collaborative Research, Professor (50152591)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
TANAKA Yoshihisa National Institute for Materials Science, Senior Researcher (60343844)
NAGANUMA Tamaki National Institute for Materials Science, Researcher (40391213)
NAITOU Kimiyoshi National Institute for Materials Science, Researcher (70421394)
|
|---|
| Project Period (FY) |
2005 – 2007
|
| Project Status |
Completed (Fiscal Year 2007)
|
| Budget Amount *help |
¥16,410,000 (Direct Cost: ¥15,300,000、Indirect Cost: ¥1,110,000)
Fiscal Year 2007: ¥4,810,000 (Direct Cost: ¥3,700,000、Indirect Cost: ¥1,110,000)
Fiscal Year 2006: ¥4,500,000 (Direct Cost: ¥4,500,000)
Fiscal Year 2005: ¥7,100,000 (Direct Cost: ¥7,100,000)
|
|---|
| Keywords | composite / ceramic / coating / function / surface / heat-resistance / light reflection / simulation |
|---|
| Research Abstract |
High temperature thermal energy surface coatings have been developed to achieve advanced thermal managing system. The key concept of the coating is to apply interference effect of electromagnetic wave using oxide ceramic multi layer structure. Application of the interference effect to thermal energy control needs (1) wide wavelength interference design and (2) high reflection over wide incident angle of electromagnetic wave. To solve these problems, three-dimensional wavy surface morphology is employed for design of the coatings. To design three-dimensional wavy surface, simulation is used : the procedure is evaluated to compare model results with experimental ones. Simulation results demonstrate the effectiveness of the wavy surface layer on thermal energy reflection. The maximum possible reflectance estimated from this simulation is larger than the flat surface. It is concluded that the present thermal energy control surface is effective way to control thermal reflection energy at high temperatures.
|
Report
(4 results)
Research Products
(15 results)
