Manipulation and physical processing for single cell in micro-channel
| Project/Area Number |
17510112
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Microdevices/Nanodevices
|
|---|
| Research Institution | National Institute of Advanced Industrial Science and Technology |
|---|
Principal Investigator |
TANIKAWA Tamio National Institute of Advanced Industrial Science and Technology, Intelligent Systems Research Institute (ISRI), Senior Research Scientist (30357470)
|
|---|
| Project Period (FY) |
2005 – 2006
|
| Project Status |
Completed (Fiscal Year 2006)
|
| Budget Amount *help |
¥3,600,000 (Direct Cost: ¥3,600,000)
Fiscal Year 2006: ¥1,400,000 (Direct Cost: ¥1,400,000)
Fiscal Year 2005: ¥2,200,000 (Direct Cost: ¥2,200,000)
|
|---|
| Keywords | micro manipulation / force measurement / cell manipulation / physical processing / micro-cannel |
|---|
| Research Abstract |
The fundamental technology of cutting of the cell using the cell characteristic evaluation system and micro-channel form for enabling physical machining in the environment of closed space as micro-cannel was established.
The cell characteristic evaluation system are consist of the electric stage, the two fingered micro hand, and the micro force sensor on the tip of finger of the micro hand. The mechanical characteristic could be measured by this system. Target cell are egg cells which are normal egg cell of cow and the egg cell by cytochalasin treatment. The system could find the difference of stiffness in two type cells. The cell cutting can be performed by weak force since the cell stiffness is lost by the cytochalasin treatment. So, by design of micro-cannel form and fluidic control, the cell cutting process can be performed.
The insertion of the single cell into a micro-cannel is very difficult. When there is a backwater in micro-cannel, the cell is caught around the backwater. The rate of insertion of a cell becomes row. A joint connection is designed for loosing the backwater. Also, the air bubble in the micro-cannel raise same problem. The connection technique not aerated of the joint parts is considered.
|
Report
(4 results)
Research Products
(8 results)
-
-
-
[Journal Article] Manipulators for cell handling2006
Author(s)
Tamio Tanikawa
-
Journal Title
WorkshoP "Robotic Cellular Surgery using Haptic and Vision feedback", IEEE 2006 International Conference of the Engineering in Medicine and Biology Society(EMBC2006)
Description
「研究成果報告書概要(和文)」より
Related Report
-
[Journal Article] Manipulators for cell handling2006
Author(s)
Tamio Tanikawa
-
Journal Title
Workshop Robotic Cellular Surgery using Haptic and Vision feedback, IEEE 2006 International Conference of the Engineering in Medicine and Biology Society(embc2006)
Description
「研究成果報告書概要(欧文)」より
Related Report
-
[Journal Article] Manipulators for cell handling2006
Author(s)
Tamio Tanikawa
-
Journal Title
Workshop "Robotic Cellular Surgery using Haptic and Vision feedback", IEEE 2006 International Conference of the Engineering in Medicine and Biology Society (EMBC2006)
Related Report
-
-
-
