Development of Detecting Signal Evaluation Method in Eddy Current Testing Using Numerical Analysis
| Project/Area Number |
17560272
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
電力工学・電気機器工学
|
|---|
| Research Institution | Fukuyama Heisei University (2007)
Fukuyama University (2005-2006) |
|---|
Principal Investigator |
TSUBOI Hajime Fukuyama Heisei University, Faculty of Business Administration, Professor (70116482)
|
|---|
| Project Period (FY) |
2005 – 2007
|
| Project Status |
Completed (Fiscal Year 2007)
|
| Budget Amount *help |
¥3,170,000 (Direct Cost: ¥2,900,000、Indirect Cost: ¥270,000)
Fiscal Year 2007: ¥1,170,000 (Direct Cost: ¥900,000、Indirect Cost: ¥270,000)
Fiscal Year 2006: ¥900,000 (Direct Cost: ¥900,000)
Fiscal Year 2005: ¥1,100,000 (Direct Cost: ¥1,100,000)
|
|---|
| Keywords | eddy current testing / numerical analysis / electromagnetic field analysis / nondestructive testing / evaluation method / 探傷信号 |
|---|
| Research Abstract |
In this project, the large number of high-precision simulation data by eddy current analysis is necessary for the investigation of eddy current testing signal. First, computation environment for forward analysis was set up. It was confirmed that parallel processing using OpenMP on personal computers with multi core CPU was effective for efficient analysis. And computation pro-grams for the parallel processing were developed. An approximation method of exciting coils to simplify eddy current analysis was also developed.
In order to examine the evaluation methods of eddy current testing signal, two-dimensional scanned data above an aluminum plate with a defect on the bottom surface were simulated. The simulation method to obtain eddy current testing signal was im-proved so that the signal of detecting coil with arbitrary shape at any location can be obtained and magnetic flux density distribu-tion above the plate can be calculated by using an exciting coil. High sensitive detection of def
… More
ect signal can be achieved by the investigation of detecting coil arrangements using the information of the magnetic flux density distribution induced by eddy cur-rent. It became also clear that the arrangements of exciting coil have an effect on detecting sensitivity.
Furthermore, effective knowledges to estimate location, size and shape of defect using signal processing methods were ob-tained. Two-dimensional FFT and Wavelet transformation were used as the signal processing methods. The methods were applied to two-dimensional scanned data of eddy current testing signal. It was confirmed that magnitude of the signal has the information of defect shape and phase of the signal has the information of location of defect in the frequency domain of FFT. However it became clear that the phase of the signal is influenced by noise. On the other hand, noise reduction can be performed by using the Wavelet transformation.
The results obtained by this project can contribute to the development of high performance evaluation method of detecting sig-nal in eddy current testing. Less
|
Report
(4 results)
Research Products
(54 results)
-
-
-
-
-
-
-
-
-
-
-
-
[Journal Article] Nondestructive Evaluation(X)2007
Author(s)
Sazabolcs Gyimothy ,Jozsef Pavo, Imre Kiss ,Gasparics, Zoltan Kalincsak, Imre Sebestyen, Gabbor Vertesy, Janos Takacs, ajine Tsuboi, Electromagnetic Reading of Laser Scribed Logistic Markers on Metallic Components
-
Journal Title
Nondestructive Evaluation(X)(IOS press)
Pages: 139-146
Description
「研究成果報告書概要(欧文)」より
Related Report
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
[Presentation] Parallel Processing using OpenMP2005
Author(s)
Kazuhiro Seo, Norio Seshima, Hajime Tsuboi
Organizer
2005 Annual Meeting Record Chugoku Branch of IEE Ja-pan, p. 349
Place of Presentation
Fukuyama University
Year and Date
2005-10-22
Description
「研究成果報告書概要(欧文)」より
Related Report
-
