Preparation of Criticality Benchmark Data for the Validation of Neutronic Calculation Method
| Project/Area Number |
17560743
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Nuclear engineering
|
|---|
| Research Institution | Kyoto University |
|---|
Principal Investigator |
NAKAJIMA Ken Kyoto University, Research Reactor Institute, Professor (60355047)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
UNESAKI Hironobu Kyoto University, Research Reactor Institute, Professor (40213467)
|
|---|
| Project Period (FY) |
2004 – 2007
|
| Project Status |
Completed (Fiscal Year 2007)
|
| Budget Amount *help |
¥2,880,000 (Direct Cost: ¥2,700,000、Indirect Cost: ¥180,000)
Fiscal Year 2007: ¥780,000 (Direct Cost: ¥600,000、Indirect Cost: ¥180,000)
Fiscal Year 2006: ¥500,000 (Direct Cost: ¥500,000)
Fiscal Year 2005: ¥1,600,000 (Direct Cost: ¥1,600,000)
|
|---|
| Keywords | Nuclear energy / Validation of neutronic calculation method / Critical experiment / Benchmark / KUCA / ベンチマークデータ / 核計算手法 / 熱中性子スペクトル / PCクラスター |
|---|
| Research Abstract |
Benchmark data of critical systems have been prepared for the validation of the neutronic calculation method. At first, a parallel computer system using PC cluster was constructed and the calculation code systems were installed. Then, the standard cores for benchmark calculations were selected from the KUCA and TCA experiments, and the following evaluations were conducted.
・Chemical analyses of polyethylene and aluminum, which are the core components, were performed, and the accuracy of KUCA critical experiments was evaluated using the errors of core componentsetc. Then, the benchmark calculation model was developed for the validation of calculation methods. Consequently, the accuracy of nuclear data was evaluated by using the developed model.
・The experimental errors of criticality for TCA's MOX cores and the effective delayed neutron fraction for uranium cores were evaluated, and the benchmark data for those cores were prepared. Using these data, the benchmark analyses were conducted to evaluate the nuclear data libraries.
・Based on the above results, the neutronic analysis method for KUR core was investigated, and the benchmark evaluation using the experimental data of highly enriched uranium cores was conducted. Then, the prediction evaluation for the low enriched uranium cores was performed. This evaluation confirms that the safe operation can be performed with the low enriched uranium cores.
|
Report
(4 results)
Research Products
(7 results)
