Fabrication of a near-field optical probe by electroless plating with submicron size-dependence
Project/Area Number |
19560738
|
Research Category |
Grant-in-Aid for Scientific Research (C)
|
Allocation Type | Single-year Grants |
Section | 一般 |
Research Field |
Material processing/treatments
|
Research Institution | Toyo University |
Principal Investigator |
MONONOBE Shuji Toyo University, 理工学部・機械工学科, 准教授 (30270705)
|
Project Period (FY) |
2007 – 2009
|
Project Status |
Completed (Fiscal Year 2009)
|
Budget Amount *help |
¥4,160,000 (Direct Cost: ¥3,200,000、Indirect Cost: ¥960,000)
Fiscal Year 2009: ¥650,000 (Direct Cost: ¥500,000、Indirect Cost: ¥150,000)
Fiscal Year 2008: ¥910,000 (Direct Cost: ¥700,000、Indirect Cost: ¥210,000)
Fiscal Year 2007: ¥2,600,000 (Direct Cost: ¥2,000,000、Indirect Cost: ¥600,000)
|
Keywords | 近接場光学 / 光ファイバー / めっき / エッチング / 走査型プローブ顕微鏡 / 無電解めっき / プローブ顕微鏡 |
Research Abstract |
We fabricated a near-field optical fiber probe based on size-dependent electroless plating under nitrogen gas atmosphere. The process consists of etching an optical fiber, by palladium coat by argon ion sputtering, electroless nickel plating. The obtained probe has an aperture with a diameter less than 40 nm.
|
Report
(4 results)
Research Products
(14 results)