| Project/Area Number |
21560876
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Nuclear engineering
|
|---|
| Research Institution | Japan Atomic Energy Agency |
|---|
Principal Investigator |
KURATA Yuji 独立行政法人日本原子力研究開発機構, 原子力基礎工学研究部門, 研究員 (30354773)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
SUZUKI Tetsuya 茨城大学, 工学部, 准教授 (70261740)
|
|---|
| Research Collaborator |
YOKOTA Hitoshi 茨城大学, 工学部, 講師 (70252260)
SATO Hidetomo 茨城大学, 工学部, 大学院生
MATSUNAGA Yuuki 茨城大学, 工学部, 大学院生
|
|---|
| Project Period (FY) |
2009 – 2011
|
| Project Status |
Completed (Fiscal Year 2011)
|
| Budget Amount *help |
¥3,510,000 (Direct Cost: ¥2,700,000、Indirect Cost: ¥810,000)
Fiscal Year 2011: ¥910,000 (Direct Cost: ¥700,000、Indirect Cost: ¥210,000)
Fiscal Year 2010: ¥1,040,000 (Direct Cost: ¥800,000、Indirect Cost: ¥240,000)
Fiscal Year 2009: ¥1,560,000 (Direct Cost: ¥1,200,000、Indirect Cost: ¥360,000)
|
|---|
| Keywords | 原子力材料 / コーティング / 鉛ビスマス腐食 / 放射性廃棄物処理 / アルミニウム合金被覆 / 長寿命放射性廃棄物処理 / 加速器駆動核変換システム / 鉛ビスマス / 重金属冷却炉 / レーザー加熱 / 腐食・防食 / 加速器駆動システム |
|---|
| Research Abstract |
An Al-powder-alloy coating method has been developed as one of technical key issues for accelerator-driven systems using liquid lead-bismuth for the purpose of transmuting long-lived radioactive wastes. The optimum condition was found in the Al-alloy coating method using Al, Ti and Fe powders and the laser beam heating. The Al-alloy coating layers produced under the optimum condition exhibited good corrosion resistance at 550℃for a long time in liquid lead-bismuth.
|
