Evaluation of Bolt-Nut Fastening Condition Using Nonlinear Ultrasonic Components
| Project/Area Number |
22760293
|
|---|
| Research Category |
Grant-in-Aid for Young Scientists (B)
|
| Allocation Type | Single-year Grants |
|---|
| Research Field |
Measurement engineering
|
|---|
| Research Institution | Akita University |
|---|
Principal Investigator |
FUKUDA Makoto 秋田大学, 大学院・工学資源学研究科, 講師 (50507671)
|
|---|
| Project Period (FY) |
2010 – 2012
|
| Project Status |
Completed (Fiscal Year 2012)
|
| Budget Amount *help |
¥4,030,000 (Direct Cost: ¥3,100,000、Indirect Cost: ¥930,000)
Fiscal Year 2012: ¥1,040,000 (Direct Cost: ¥800,000、Indirect Cost: ¥240,000)
Fiscal Year 2011: ¥1,560,000 (Direct Cost: ¥1,200,000、Indirect Cost: ¥360,000)
Fiscal Year 2010: ¥1,430,000 (Direct Cost: ¥1,100,000、Indirect Cost: ¥330,000)
|
|---|
| Keywords | 計測工学 / 機械材料・材料力学 / 解析・評価 / 非線形超音波 / ボルト締結 / 軸力 / トルク / 有限振幅超音波 / 2次高調波 / 非破壊検査 / 接触型音響非線形性 / 非線形音波 / 二層型圧電振動子 |
|---|
| Research Abstract |
This study examines the use of ultrasonic second harmonic components in the quality control of bolt-fastened structures. An improved method for detecting the second harmonic components, from a bolt fastened with a nut, using the transmission method is constructed. A hexagon head iron bolt was used in the experiments. The bolt was fastened using a digital torque wrench. The second harmonic component increased by approximately 10 dB before and after the bolt was fastened. The sources of second harmonic components were contact acoustic nonlinearity in the screw thread interfaces of the bolt-nut and were the plastic deformation in the bolt with fastening bolt. This result was almost same compared with previous our method. Moreover, increase values of second harmonic components are changed at the normal axial force. Consequently, usefulness of the novel method for detecting second harmonic ultrasonic components generated from fastened bolt was confirmed.
|
Report
(4 results)
Research Products
(68 results)
