Development of V-based high capacity, high durability protium storage alloys for fuel cell vehicles.
| Project/Area Number |
22760526
|
|---|
| Research Category |
Grant-in-Aid for Young Scientists (B)
|
| Allocation Type | Single-year Grants |
|---|
| Research Field |
Structural/Functional materials
|
|---|
| Research Institution | Tohoku University |
|---|
Principal Investigator |
|
|---|
| Project Period (FY) |
2010 – 2011
|
| Project Status |
Completed (Fiscal Year 2011)
|
| Budget Amount *help |
¥4,290,000 (Direct Cost: ¥3,300,000、Indirect Cost: ¥990,000)
Fiscal Year 2011: ¥1,560,000 (Direct Cost: ¥1,200,000、Indirect Cost: ¥360,000)
Fiscal Year 2010: ¥2,730,000 (Direct Cost: ¥2,100,000、Indirect Cost: ¥630,000)
|
|---|
| Keywords | 水素吸蔵合金 / V-Ti-Cr / 燃料電池自動車 / 低温特性 / 高容量 / 水素 / 低炭素 |
|---|
| Research Abstract |
For implementation of hydrogen society, development of high volume efficient and high durability hydrogen storage method is the most urgent issue. Hydrogen (protium)storage alloys are known for its volume efficiency but their poor desorption characteristics at cold temperature and durability should be improved. Through this research, V-rich V-Ti-Cr-M(M=Al, Mo)with high effective cyclic protium capacity (about 2. 3mass%), high durability (maintaining 99%of initial capacity after 200 cycles)and good hydrogen de sorption characteristics (0. 2Mpa at-30degree Celsius). These alloys are holding state of the art performance as of Fy2011.
|
Report
(3 results)
Research Products
(5 results)
