RECOVERY OF PRECIOUS METAL AND RARE METAL FROM LIQUEFATION RESIDUES OF AUTOMOBILE SHREDDER RESIDUES
| Project/Area Number |
23560988
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Multi-year Fund |
|---|
| Section | 一般 |
|---|
| Research Field |
Earth system and resources enginnering
|
|---|
| Research Institution | Tohoku University of Community Service and Science |
|---|
Principal Investigator |
FURUYAMA TAKASHI 東北公益文科大学, 公私立大学の部局等, 准教授 (90284546)
|
|---|
| Project Period (FY) |
2011 – 2013
|
| Project Status |
Completed (Fiscal Year 2013)
|
| Budget Amount *help |
¥5,330,000 (Direct Cost: ¥4,100,000、Indirect Cost: ¥1,230,000)
Fiscal Year 2013: ¥1,170,000 (Direct Cost: ¥900,000、Indirect Cost: ¥270,000)
Fiscal Year 2012: ¥1,820,000 (Direct Cost: ¥1,400,000、Indirect Cost: ¥420,000)
Fiscal Year 2011: ¥2,340,000 (Direct Cost: ¥1,800,000、Indirect Cost: ¥540,000)
|
|---|
| Keywords | ASR / ウレタン / ポリプロビレン / 油化 / 貴金属 / 浮遊選別 / ポリプロピレン / ABS樹脂 / エンジンオイル / レアメタル |
|---|
| Research Abstract |
Automobile Shredder Residue (ASR) is the industrial waste generated after the processing of end-of-vehicles. Urethane foam, polypropylene and ABS resin are plastics mainly in light ASR. In this study the experiments on the liquefaction of these plastics were carried out using potable reactor (vessel volume : 120 ml). 49.75 g of organic solvent (engine oil) and 0.25 g of plastics samples were mixed in the vessel at the agitator rotation of 600 rpm. Then all of urethane foam and polypropylene were melted at the temperature of 250 degrees for 10 minutes although most of ABS resin was not melted at the temperature of 300 degrees for 10 minutes.
|
Report
(4 results)
Research Products
(4 results)
