| Budget Amount *help |
¥5,200,000 (Direct Cost: ¥4,000,000、Indirect Cost: ¥1,200,000)
Fiscal Year 2015: ¥650,000 (Direct Cost: ¥500,000、Indirect Cost: ¥150,000)
Fiscal Year 2014: ¥1,820,000 (Direct Cost: ¥1,400,000、Indirect Cost: ¥420,000)
Fiscal Year 2013: ¥2,730,000 (Direct Cost: ¥2,100,000、Indirect Cost: ¥630,000)
|
|---|
| Outline of Final Research Achievements |
Micro aspheric glass lenses have been used in various devices, such as digital cameras, laser devices and medical devices. In order to machine micro aspheric ceramic molds precisely and efficiently, micro milling tools made of single crystalline diamond (SCD) are developed. Many cutting edges are fabricated 3-dimensionally on the edge of a cylindrical SCD by a laser beam. Flat binderless tungsten carbide mold was cut with the developed tool to evaluate the tool wear rate and its life. Some micro aspheric molds of tungsten carbide were cut with the tool at a rotational speed of 50,000 min-1. The molds were cut in the ductile mode. The form accuracy obtained was about 100 nm P-V and the surface roughness 12 nm Rz.
|
