Development of a skill learning support system by taking a picture and the omnidirectional photography animation which used a bones picture
| Project/Area Number |
26350272
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Multi-year Fund |
|---|
| Section | 一般 |
|---|
| Research Field |
Educational technology
|
|---|
| Research Institution | Shinshu University |
|---|
Principal Investigator |
NISHI Masaaki 信州大学, 学術研究院教育学系, 教授 (50218103)
|
|---|
| Project Period (FY) |
2014-04-01 – 2017-03-31
|
| Project Status |
Completed (Fiscal Year 2016)
|
| Budget Amount *help |
¥4,810,000 (Direct Cost: ¥3,700,000、Indirect Cost: ¥1,110,000)
Fiscal Year 2016: ¥1,690,000 (Direct Cost: ¥1,300,000、Indirect Cost: ¥390,000)
Fiscal Year 2015: ¥1,170,000 (Direct Cost: ¥900,000、Indirect Cost: ¥270,000)
Fiscal Year 2014: ¥1,950,000 (Direct Cost: ¥1,500,000、Indirect Cost: ¥450,000)
|
|---|
| Keywords | 教授学習支援システム / 技能修得支援システム / 自己確認学習 / 作品撮影・閲覧システム / 教授学習システム |
|---|
| Outline of Final Research Achievements |
The way of the correction and the size of the working posture were indicated using distance sensor KINECT of three dimensions. It was effective to make the working posture right and improve the vertical precision of the section as a result of the class practice which sawed a wooden board. After doing several times of saw pull, the person who uses was more effective in the fixation of the skill acquisition than this system was used from the beginning. I made sure that a revolution and expansion can be operated by movement of a hand finger using distance sensor LEAP of three dimensions to read a three-dimensional picture of a work. When the class practice which observes the former work example and use example was done at the plan stage of the manufactured product, it was effective to plan a manufactured product to utilize the function of the revolution and the expansion and check a detail of assembly.
|
Report
(4 results)
Research Products
(15 results)
