• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

A multi-objective life-cycle design support system for Improving Performance and CO2 Savings at the early phase of design

Research Project

Project/Area Number 26870628
Research Category

Grant-in-Aid for Young Scientists (B)

Allocation TypeMulti-year Fund
Research Field Social systems engineering/Safety system
Design engineering/Machine functional elements/Tribology
Research InstitutionMeiji University

Principal Investigator

Inoue Masato  明治大学, 理工学部, 専任准教授 (60365468)

Project Period (FY) 2014-04-01 – 2017-03-31
Project Status Completed (Fiscal Year 2016)
Budget Amount *help
¥4,030,000 (Direct Cost: ¥3,100,000、Indirect Cost: ¥930,000)
Fiscal Year 2016: ¥520,000 (Direct Cost: ¥400,000、Indirect Cost: ¥120,000)
Fiscal Year 2015: ¥1,170,000 (Direct Cost: ¥900,000、Indirect Cost: ¥270,000)
Fiscal Year 2014: ¥2,340,000 (Direct Cost: ¥1,800,000、Indirect Cost: ¥540,000)
Keywordsライフサイクル設計 / 多目的設計支援 / 環境負荷削減 / 初期設計段階 / セットベース設計 / 設計工学 / 設計支援システム / 環境配慮設計 / 多目的満足化 / エージェント技術 / CAD
Outline of Final Research Achievements

Preplanning the life cycle options for each part of a product and evaluating the environmental loads of the product at the early phase of design by applying 3D-CAD lead to resource recycling and significant reductions in the environmental loads for the whole product life cycle. The early phase of design contains multiple sources of uncertainties. This paper proposes a life cycle design support system based on 3D-CAD, which enables a sat-isficing design for both the product performances and the reduction of the environmental loads. The proposed system supports to define the life cycle options and to obtain multi-satisfactory design solution sets by applying a preference set-based design method, which enables a flexible and robust design under various sources of un-certainties. The present study applies the proposed system to a multi-objective problem for technical and envi-ronmental performance requirements as an example problem, that is, a cleaner model created by 3D-CAD.

Report

(4 results)
  • 2016 Annual Research Report   Final Research Report ( PDF )
  • 2015 Research-status Report
  • 2014 Research-status Report
  • Research Products

    (49 results)

All 2017 2016 2015 2014 Other

All Int'l Joint Research (3 results) Journal Article (14 results) (of which Int'l Joint Research: 6 results,  Peer Reviewed: 13 results,  Acknowledgement Compliant: 5 results,  Open Access: 1 results) Presentation (30 results) (of which Int'l Joint Research: 17 results,  Invited: 3 results) Remarks (2 results)

  • [Int'l Joint Research] University of Wuppertal(Germany)

    • Related Report
      2016 Annual Research Report
  • [Int'l Joint Research] Eskisehir Osmangazi University(Turkey)

    • Related Report
      2016 Annual Research Report
  • [Int'l Joint Research] University of Wuppertal(Germany)

    • Related Report
      2015 Research-status Report
  • [Journal Article] リバース・サプライチェーンネットワークの設計と素材再生分析2017

    • Author(s)
      伊集院大将,山田哲男,石垣綾,井上全人
    • Journal Title

      日本設備管理学会誌

      Volume: 28, 4 Pages: 11-23

    • Related Report
      2016 Annual Research Report
    • Peer Reviewed
  • [Journal Article] Upgradable Design for Sustainable Manufacturer Performance and Profitability and Reduction of Environmental Load2016

    • Author(s)
      Shuho Yamada, Tetsuo Yamada, Stefan Bracke and Masato Inoue
    • Journal Title

      International Journal of Automation Technology

      Volume: 10 Issue: 5 Pages: 690-698

    • DOI

      10.20965/ijat.2016.p0690

    • NAID

      130007673945

    • ISSN
      1881-7629, 1883-8022
    • Year and Date
      2016-09-05
    • Related Report
      2016 Annual Research Report
    • Peer Reviewed / Int'l Joint Research / Acknowledgement Compliant
  • [Journal Article] Global Supply Chain Network Design for Lower Material-Based CO2 Emissions and Costs between Developed and Emerging Countries2016

    • Author(s)
      Tomoyuki Urata, Tetsuo Yamada, Norihiro Itsubo, and Masato Inoue
    • Journal Title

      Journal of Japan Industrial Management Association

      Volume: 67, 2E Pages: 156-166

    • NAID

      130006942827

    • Related Report
      2016 Annual Research Report
    • Peer Reviewed
  • [Journal Article] Disassembly Parts Selection and Analysis for Recycling Rate and Cost by Global Programming2016

    • Author(s)
      Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Ishigaki and Masato Inoue
    • Journal Title

      Mechanical Engineering Journal, The Japan Society of Mechanical Engineers

      Volume: 10, 3 Pages: 1-15

    • Related Report
      2016 Annual Research Report
    • Peer Reviewed / Int'l Joint Research
  • [Journal Article] 製品の違いを通じた組立・分解システムの比較考察によるボトルネック作業の特定とその改善方法2016

    • Author(s)
      木下雄貴,山田哲男,浦田智幸,山田周歩,井上全人
    • Journal Title

      日本設備管理学会誌

      Volume: 27, 4 Pages: 131-144

    • Related Report
      2016 Annual Research Report 2015 Research-status Report
    • Peer Reviewed
  • [Journal Article] Disassembly System Modeling and Design with Parts Selection for Cost, Recycling and CO2 Saving Rates Using Multi Criteria Optimization2016

    • Author(s)
      Kento Igarashi, Tetsuo Yamada, Surendra M. Gupta, Masato Inoue and Norihiro Itsubo
    • Journal Title

      Journal of Manufacturing Systems

      Volume: 38, 41 Pages: 151-164

    • Related Report
      2016 Annual Research Report 2015 Research-status Report
    • Peer Reviewed / Int'l Joint Research
  • [Journal Article] Material Based Low-Carbon and Economic Supplier Selection with Estimation of GHG Emissions and Affordable Cost Increment for Parts Production among Multiple Asian Countries2016

    • Author(s)
      Yuta Yoshizaki, Tetsuo Yamada, Norihiro Itsubo and Masato Inoue
    • Journal Title

      Journal of Japan Industrial Management Association

      Volume: 66, 4E Pages: 435-442

    • NAID

      130005133234

    • Related Report
      2016 Annual Research Report 2015 Research-status Report
    • Peer Reviewed
  • [Journal Article] Product Upgradability for Satisfying Future Performance, Low Price and Environmental Loads, and Manufacturer Profitability throughout the Product Lifecycle2016

    • Author(s)
      Masato Inoue, Shuho Yamada, Tetsuo Yamada, Stefan Bracke
    • Journal Title

      Procedia CIRP

      Volume: 48 Pages: 40-44

    • Related Report
      2016 Annual Research Report
    • Peer Reviewed / Int'l Joint Research / Acknowledgement Compliant
  • [Journal Article] Contribution for Analysing, Saving and Prioritising of Lessons Learned Issues Regarding Product Improvement and Future Product Generation2016

    • Author(s)
      Stefan Bracke, Masato Inoue, Berna Ulutas
    • Journal Title

      Procedia CIRP

      Volume: 40 Pages: 179-184

    • DOI

      10.1016/j.procir.2016.01.095

    • Related Report
      2016 Annual Research Report
    • Peer Reviewed / Int'l Joint Research
  • [Journal Article] Analysis of Environmental and Economic Disassembly Parts Selection by Goal Programming2016

    • Author(s)
      Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Ishigaki and Masato Inoue
    • Journal Title

      Procedia CIRP

      Volume: 40 Pages: 162-167

    • DOI

      10.1016/j.procir.2016.01.092

    • Related Report
      2016 Annual Research Report
  • [Journal Article] 製品・生産設計間における組立および分解の作業とシステムの比較分析に関する事例研究2015

    • Author(s)
      浦田智幸,山田哲男,五十嵐健人,井上全人,木下雄貴
    • Journal Title

      日本設備管理学会誌

      Volume: Vo. 27, No. 3 Pages: 82-91

    • Related Report
      2015 Research-status Report
    • Peer Reviewed
  • [Journal Article] Upgradable Design for Reduction of Production Cost and CO2 Emission - Case Study of a Laptop Computer2015

    • Author(s)
      Shuho Yamada, Tetsuo Yamada, Stefan Bracke and Masato Inoue
    • Journal Title

      Applied Mechanics and Materials

      Volume: Vol. 761 Pages: 589-593

    • DOI

      10.4028/www.scientific.net/amm.761.589

    • Related Report
      2015 Research-status Report
    • Peer Reviewed / Int'l Joint Research / Acknowledgement Compliant
  • [Journal Article] An Upgradable Product Design Method for Improving Performance, CO2 Savings, and Production Cost Reduction: Vacuum Cleaner Case Study2014

    • Author(s)
      Masato Inoue, Shuho Yamada, Tetsuo Yamada, Stefan Bracke
    • Journal Title

      International Journal of Supply Chain Management

      Volume: 3 Pages: 100-106

    • Related Report
      2014 Research-status Report
    • Peer Reviewed / Open Access / Acknowledgement Compliant
  • [Journal Article] 初期設計段階から性能と環境負荷削減を両立する3D-CADに基づくライフサイクル設計支援システム2014

    • Author(s)
      井上全人,山田哲男,石川晴雄
    • Journal Title

      設計工学

      Volume: 49 Pages: 543-549

    • NAID

      40020236172

    • Related Report
      2014 Research-status Report
    • Peer Reviewed / Acknowledgement Compliant
  • [Presentation] Analysis of Material Based GHG Emissions and Costs for Assembly Products Using Asian Lifecycle Inventory Databases: Cell Phone Case Study2017

    • Author(s)
      Rena Kondo, Yuki Kinoshita, Tetsuo Yamada, Norihiro Itsubo, and Masato Inoue
    • Organizer
      The 24th CIRP Conference on Life Cycle Engineering (CIRP LCE 2017)
    • Place of Presentation
      Kamakura
    • Year and Date
      2017-03-08
    • Related Report
      2016 Annual Research Report
    • Int'l Joint Research
  • [Presentation] A Design Method Obtaining Diverse Design Solution Sets for the Boundary Condition Change: Application to an Isolation System2016

    • Author(s)
      Yoshiaki Murata, Masaki Takahashi, Yosuke Takeuchi and Masato Inoue
    • Organizer
      Asia Design Engineering Workshop 2016 (A-DEWS 2016)
    • Place of Presentation
      Osaka
    • Year and Date
      2016-12-12
    • Related Report
      2016 Annual Research Report
    • Int'l Joint Research
  • [Presentation] Consideration of Reliability Issues within the Product Life Cycle Design2016

    • Author(s)
      Shuho Yamada, and Masato Inoue
    • Organizer
      2nd Symposium on Computational Reliability Engineering (CRE) in Product Development and Manufacturing
    • Place of Presentation
      Dresden
    • Year and Date
      2016-10-27
    • Related Report
      2016 Annual Research Report
    • Int'l Joint Research / Invited
  • [Presentation] Environmental and Economic Disassembly Parts Selection Design for Recycling, CO2 Saving Rates and Cost by Goal Programming2016

    • Author(s)
      Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Igarashi, and Masato Inoue
    • Organizer
      The 18th International Conference on Industrial Engineering (IJIE2016)
    • Place of Presentation
      Seoul
    • Year and Date
      2016-10-10
    • Related Report
      2016 Annual Research Report
    • Int'l Joint Research
  • [Presentation] 製品のアップグレード設計への適合性評価-ノートパソコンの設計問題への適用2016

    • Author(s)
      柴田知世,山田周歩,山田哲男,井上全人
    • Organizer
      日本機械学会 第26回 設計工学・システム部門講演会
    • Place of Presentation
      慶應義塾大学
    • Year and Date
      2016-10-09
    • Related Report
      2016 Annual Research Report
  • [Presentation] A Case Study in Quantitative Estimation of the CO2-Emissions Reduction from 50 Major Reuse Parts for Japanese Automobile based on Data of Vehicle Inspection Certificate2016

    • Author(s)
      Masato Inoue, Sota Takahashi, Mitsunobu Fujita, Takao Mori, Motohiro Tamaki, Junji Sugimoto, Katsumi Ishizuka, Katsumi Oppata, Shigeyuki Suzuki, Kenroku Kobayashi, Hironori Tani and Akihiro Hayakawa
    • Organizer
      The 12th Biennial International Conference on EcoBalance (EcoBalance 2016)
    • Place of Presentation
      Kyoto
    • Year and Date
      2016-10-03
    • Related Report
      2016 Annual Research Report
    • Int'l Joint Research
  • [Presentation] Decision Process within the Conceptual Design Phase of Eco-Friendly Products2016

    • Author(s)
      Stefan Bracke, Shuho Yamada, Yuki Kinoshita, Masato Inoue and Tetsuo Yamada
    • Organizer
      14th Global Conference on Sustainable Manufacturing (GCSM 2016)
    • Place of Presentation
      Cape Town
    • Year and Date
      2016-10-02
    • Related Report
      2016 Annual Research Report
    • Int'l Joint Research
  • [Presentation] Reliability Engineering in face of Shorten Product Life Cycles: Challenges, Technique Trends and Method Approaches to Ensure Product Reliability2016

    • Author(s)
      Stefan Bracke, Simon Kutz, Masato Inoue, Hanno Gottschalk, Marcin Hinz, Edoardo Patelli, Christoph Hartl, Berna Ulutas, Pasacal Bonnaud, and Peter Moers
    • Organizer
      European Safety and Reliability (ESREL 2016)
    • Place of Presentation
      Glasgow
    • Year and Date
      2016-09-25
    • Related Report
      2016 Annual Research Report
    • Int'l Joint Research
  • [Presentation] Set-Based Universal Design Method Considering with User Requirements Variability: Case Study of a Mechanical Pencil2016

    • Author(s)
      Wataru Suzuki, Masato Shimada, Shuho Yamada and Masato Inoue
    • Organizer
      International Conference on Design and Concurrent Engineering (iDECON 2016)
    • Place of Presentation
      Pulau Langkawi
    • Year and Date
      2016-09-19
    • Related Report
      2016 Annual Research Report
    • Int'l Joint Research
  • [Presentation] Proposal of a Universal Design Method for Reflecting Physical Characteristics of Diverse Users: Case Study of a Bicycle Frame2016

    • Author(s)
      Masato Shimada, Wataru Suzuki, Shuho Yamada and Masato Inoue
    • Organizer
      International Conference on Design and Concurrent Engineering (iDECON 2016)
    • Place of Presentation
      Pulau Langkawi
    • Year and Date
      2016-09-19
    • Related Report
      2016 Annual Research Report
    • Int'l Joint Research
  • [Presentation] A Universal Design Method for Reflecting Physical Characteristics Variability: Case Study of a Bicycle Frame2016

    • Author(s)
      Masato Shimada, Wataru Suzuki, Shuho Yamada and Masato Inoue
    • Organizer
      Universal Design 2016 (UD2016)
    • Place of Presentation
      York
    • Year and Date
      2016-08-21
    • Related Report
      2016 Annual Research Report
    • Int'l Joint Research
  • [Presentation] Product Upgradability for Satisfying Future Performance, Low Price and Environmental Loads, and Manufacturer Profitability throughout the Product Lifecycle2016

    • Author(s)
      Masato Inoue, Shuho Yamada, Tetsuo Yamada and Stefan Bracke
    • Organizer
      3rd CIRP Conference on Life Cycle Engineering (CIRP LCE 2016)
    • Place of Presentation
      Berlin
    • Year and Date
      2016-05-22
    • Related Report
      2016 Annual Research Report
    • Int'l Joint Research
  • [Presentation] Satisficing Design Method for Sustainable Performance, Profitability for Manufacturer and Reduction of Environmental Loads2015

    • Author(s)
      11.Shuho Yamada, Tetsuo Yamada, Stefan Bracke and Masato Inoue
    • Organizer
      EcoDesign 2015 International Symposium
    • Place of Presentation
      Tokyo
    • Year and Date
      2015-12-02
    • Related Report
      2015 Research-status Report
    • Int'l Joint Research
  • [Presentation] Consideration of Reliability Issues within the product development phase2015

    • Author(s)
      Masato Inoue
    • Organizer
      1st Symposium on Computational Reliability Engineering (CRE) in Product Development and Manufacturing
    • Place of Presentation
      Germany
    • Year and Date
      2015-10-22
    • Related Report
      2015 Research-status Report
    • Int'l Joint Research / Invited
  • [Presentation] Contribution for Analysing, Saving and Prioritising of Lessons Learned Issues Regarding Product Improvement and Future Product Generations2015

    • Author(s)
      Stefan Bracke, Masato Inoue and Berna Ulutas
    • Organizer
      13th Global Conference on Sustainable Manufacturing (GCSM 2015)
    • Place of Presentation
      Vietnam
    • Year and Date
      2015-09-16
    • Related Report
      2015 Research-status Report
    • Int'l Joint Research
  • [Presentation] Set-Based Design for Obtaining Multi-Objective Satisfactory Solutions Based on Dynamic Simulations2015

    • Author(s)
      Yosuke Takeuchi, Masaki Takahashi, Shunsuke Iijima, Yoshiaki Murata and Masato Inoue
    • Organizer
      International Conference on Design and Concurrent Engineering (iDECON 2015)
    • Place of Presentation
      Tokushima
    • Year and Date
      2015-09-06
    • Related Report
      2015 Research-status Report
    • Int'l Joint Research
  • [Presentation] Set-Based Universal Design for Obtaining Diverse Solution Sets Based on Physical Characteristics Variability: Case Study of a Train Strap2015

    • Author(s)
      Wataru Suzuki, Yosuke Takeuchi and Masato Inoue
    • Organizer
      International Conference on Design and Concurrent Engineering (iDECON 2015)
    • Place of Presentation
      Tokushima
    • Year and Date
      2015-09-06
    • Related Report
      2015 Research-status Report
    • Int'l Joint Research
  • [Presentation] Quantitative Estimation of the CO2-Emissions Reduction from Reuse Automobile Parts2015

    • Author(s)
      Sota Takahashi, Masato Iwasaki, Mitsunobu Fujita, Takao Mori, Motohiro Tamaki, Akihiko Sano, Shigeyuki Suzuki, Kenroku Kobayashi, Hironori Tani, Akihiro Hayakawa and Masato Inoue
    • Organizer
      International Conference on Design and Concurrent Engineering (iDECON 2015)
    • Place of Presentation
      Tokushima
    • Year and Date
      2015-09-06
    • Related Report
      2015 Research-status Report
    • Int'l Joint Research
  • [Presentation] An Environmental Conscious Product Design Method for Sustainability of the Product's Value2014

    • Author(s)
      Shuho Yamada, Tetsuo Yamada, Katsuyuki Nakano, Stefan Bracke and Masato Inoue
    • Organizer
      Going Green - CARE INNOVATION 2014
    • Place of Presentation
      Vienna, AUSTRIA
    • Year and Date
      2014-11-18 – 2014-11-21
    • Related Report
      2014 Research-status Report
  • [Presentation] Upgradable Design for Reduction of Production Cost and CO2 Emission - Case Study of a Laptop Computer2014

    • Author(s)
      Shuho Yamada, Tetsuo Yamada, Stefan Bracke and Masato Inoue
    • Organizer
      3rd International Conference on Design and Concurrent Engineering (iDECON 2014)
    • Place of Presentation
      Melaka, MALAYSIA
    • Year and Date
      2014-09-22 – 2014-09-23
    • Related Report
      2014 Research-status Report
  • [Presentation] 自動車解体工場調査に基づくリユース部品使用時の環境負荷削減効果2014

    • Author(s)
      高橋颯太,岩崎誠和,藤田光伸,森孝男,玉木基裕,佐野明彦,谷洋紀,早川明宏,井上全人
    • Organizer
      日本機械学会 第24回 設計工学・システム部門講演会
    • Place of Presentation
      徳島大学
    • Year and Date
      2014-09-17 – 2014-09-19
    • Related Report
      2014 Research-status Report
  • [Presentation] 生産時の環境負荷削減に向けたアップグレード製品設計手法2014

    • Author(s)
      山田周歩,山田哲男,井上全人
    • Organizer
      日本機械学会 第24回 設計工学・システム部門講演会
    • Place of Presentation
      徳島大学
    • Year and Date
      2014-09-17 – 2014-09-19
    • Related Report
      2014 Research-status Report
  • [Presentation] An Upgrade Product Design Method for Satisfying Performance Criteria, Environment Load and Cost2014

    • Author(s)
      Shuho Yamada, Tetsuo Yamada, Stefan Bracke and Masato Inoue
    • Organizer
      The 3rd International Conference on Design Engineering and Science (ICDES2014)
    • Place of Presentation
      Pilsen, CZECH
    • Year and Date
      2014-08-31 – 2014-09-03
    • Related Report
      2014 Research-status Report
  • [Presentation] Environmental Load Evaluation of Reuse Parts for Automobiles2014

    • Author(s)
      Masato Iwasaki, Mitsunobu Fujita, Takao Mori, Akihiko Sasaki, Motohiro Tamaki, Akihiko Sano, Hironori Tani, Akihiro Hayakawa and Masato Inoue
    • Organizer
      The 3rd International Conference on Design Engineering and Science (ICDES2014)
    • Place of Presentation
      Pilsen, CZECH
    • Year and Date
      2014-08-31 – 2014-09-03
    • Related Report
      2014 Research-status Report
  • [Presentation] Design Method for Obtaining Diverse Possible Design Solution Sets to Adapt to Changes in Boundary Conditions2014

    • Author(s)
      Shunsuke Iijima, Masaki Takahashi and Masato Inoue
    • Organizer
      The 3rd International Conference on Design Engineering and Science (ICDES2014)
    • Place of Presentation
      Pilsen, CZECH
    • Year and Date
      2014-08-31 – 2014-09-03
    • Related Report
      2014 Research-status Report
  • [Presentation] 不確実条件下における設計・意思決定支援2014

    • Author(s)
      井上全人
    • Organizer
      日本機械学会 第40回 A-TS12-05設計研究会
    • Place of Presentation
      明治大学
    • Year and Date
      2014-08-19
    • Related Report
      2014 Research-status Report
    • Invited
  • [Presentation] Upgradable Design for Various User Demands2014

    • Author(s)
      Masato Inoue, Shuho Yamada, Tetsuo Yamada and Stefan Bracke
    • Organizer
      11th International Conference on Product Lifecycle Management (PLM 14)
    • Place of Presentation
      Yokohama, JAPAN
    • Year and Date
      2014-07-07 – 2014-07-09
    • Related Report
      2014 Research-status Report
  • [Presentation] 異なるユーザ要求を考慮したアップグレード製品設計方法の提案2014

    • Author(s)
      山田周歩,山田哲男,井上全人
    • Organizer
      日本設計工学会2014年度春季研究発表講演会
    • Place of Presentation
      明治大学
    • Year and Date
      2014-05-24 – 2014-05-25
    • Related Report
      2014 Research-status Report
  • [Presentation] 自動車のリユース部品使用によるCO2排出量の削減効果(自動車解体工場調査およびドアミラーとドアパネルのLCA解析)2014

    • Author(s)
      岩崎誠和,藤田光伸,森孝男,佐々木顕彦,玉木基裕,佐野明彦,谷洋紀,早川明宏,井上全人
    • Organizer
      日本設計工学会2014年度春季研究発表講演会
    • Place of Presentation
      明治大学
    • Year and Date
      2014-05-24 – 2014-05-25
    • Related Report
      2014 Research-status Report
  • [Presentation] 初期設計段階における境界条件の変化に対応する設計方法の提案2014

    • Author(s)
      飯島駿輔,井上全人
    • Organizer
      日本設計工学会2014年度春季研究発表講演会
    • Place of Presentation
      明治大学
    • Year and Date
      2014-05-24 – 2014-05-25
    • Related Report
      2014 Research-status Report
  • [Remarks] 明治大学理工学部機械情報工学科設計システム研究室

    • URL

      http://www.isc.meiji.ac.jp/̃design/

    • Related Report
      2015 Research-status Report
  • [Remarks] 明治大学理工学部機械情報工学科設計システム研究室

    • URL

      http://www.isc.meiji.ac.jp/~design/

    • Related Report
      2014 Research-status Report

URL: 

Published: 2014-04-04   Modified: 2018-03-22  

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi