Development of Hydraulic Snow Conveying Devices
| Project/Area Number |
62850033
|
|---|
| Research Category |
Grant-in-Aid for Developmental Scientific Research
|
| Allocation Type | Single-year Grants |
|---|
| Research Field |
Fluid engineering
|
|---|
| Research Institution | Nagaoka University of Technology |
|---|
Principal Investigator |
TERUYOSHI Umemura Professor of Nagaoka University of Technology, 工学部, 教授 (90008821)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
谷内 宏 荏原製作所, システム事業部, 副参事
内倉 章夫 新潟鉄工所, 材料構造研究室, 課長
MASATAKA Shirakashi Associate Professor of Nagaoka University of Technology, 工学部, 助教授 (60115110)
AKIO Uchikura Section Director of Niigata Engineering
HIROSHI Taniuchi Section Director of Ebara Corporation
|
|---|
| Project Period (FY) |
1987 – 1988
|
| Project Status |
Completed (Fiscal Year 1988)
|
| Budget Amount *help |
¥6,300,000 (Direct Cost: ¥6,300,000)
Fiscal Year 1988: ¥2,100,000 (Direct Cost: ¥2,100,000)
Fiscal Year 1987: ¥4,200,000 (Direct Cost: ¥4,200,000)
|
|---|
| Keywords | HYDRAULIC CONVEYING OF SNOW / SNOW FEEDER / SNOW / WATER MIXTURE |
|---|
| Research Abstract |
In order to realize hydraulic conveying of snow, a new system of snow removal from urban area, the following devices have been developed : a snow feeder which mixes snow with water and feeds the mixture into the pipeline with a slurry pump, a snow concentration meter which measures the snow fraction of the mixture in situ, and a water separator for regulating the snow fraction.
In the snow conveying experiments the choking of each devices was investigated with much attention and some of its causes were clarified. Thereafter, whole devices have shown good performance by introducing their appropriate methods of avoiding choking.
|
Report
(2 results)
Research Products
(21 results)
