• 研究課題をさがす
  • 研究者をさがす
  • KAKENの使い方
  1. 前のページに戻る

材料の分岐変形に関する弾塑性変形解析と微小疲労き裂進展挙動解明への応用

研究課題

研究課題/領域番号 04F04078
研究種目

特別研究員奨励費

配分区分補助金
応募区分外国
研究分野 機械材料・材料力学
研究機関九州大学

研究代表者

村上 敬宜  九州大学, 大学院・工学研究院, 教授

研究分担者 KHOJASTEHPOUR Mehdi  九州大学, 大学院・工学研究院, 外国人特別研究員
KHOJASTEHPOUR M  九州大学, 大学院・工学研究院, 外国人特別研究員
研究期間 (年度) 2004 – 2005
研究課題ステータス 完了 (2005年度)
配分額 *注記
2,400千円 (直接経費: 2,400千円)
2005年度: 1,200千円 (直接経費: 1,200千円)
2004年度: 1,200千円 (直接経費: 1,200千円)
キーワードBifurcation and Instability / Elastoplasticity / Constitutive Behavior / Elastoplastic Materials / Subloading Surface Model / Crack tip Plasticity / Dislocation Mechanics / Mixed Mode Fracture / Shear Band / Bifurcation
研究概要

Elastoplastic analysis of bifurcation and application to fatigue threshold analysis of small cracks
Bifurcation :
Analytical solutions are presented for the localized and diffuse bifurcations of an incompressible circular cylinder subjected to axisymmetric loading, whose constitutive behavior is described by adopting the tangential-subloading surface model falling within the framework of tangential plasticity. The analysis includes the conditions for shear band formation, shear band inclination, diffuse buckling formation, and the long and short wavelength limits of diffuse buckling modes in relation to material properties and stress. It becomes well-informed that the normal-yield ratio describing the degree of approach to the normal-yield state, the tangential-plastic strain rate due to the tangential-stress rate effect and the kinematic hardening variable influence the onset of localized and diffuse bifurcations.
Fatigue and Fracture :
The characterization of the elastoplastic zone at the tip of a blunt crack under mixed mode loading was discussed. The deformed zone appearing at the crack front is described by presenting a criterion based on the subloading surface concept falling within the framework of unconventional plasticity. It is revealed that the mixed mode crack propagates along the minimum value of the elastoplastic region.
A study was conducted to clarify the behavior of a dislocation located on the inclined plane near a finite crack. Equations were presented for the forces based on the interactions between a finite crack and the dislocations near the crack tip. The influences of crack length on the forces applied to a dislocation were investigated using the extended equations.

報告書

(2件)
  • 2005 実績報告書
  • 2004 実績報告書
  • 研究成果

    (11件)

すべて 2006 2005 2004

すべて 雑誌論文 (11件)

  • [雑誌論文] Antisymmetric bifurcation in an elastoplastic cylinder with tangential plasticity2006

    • 著者名/発表者名
      Khojastehpour, M., Murakami.Y, Hashiguchi.K.
    • 雑誌名

      Mechanics of Materials 38(In press)

    • 関連する報告書
      2005 実績報告書
  • [雑誌論文] Antisymmetric bifurcation in elastoplastic cylinders under uniaxial compression2005

    • 著者名/発表者名
      Khojastehpour, M., Murakami.Y, Hashiguchi.K.
    • 雑誌名

      Journal of Applied Mechanics JSCE 8

      ページ: 361-366

    • NAID

      130004258301

    • 関連する報告書
      2005 実績報告書
  • [雑誌論文] Elastoplastic zone and crack initiation in blunt-notched plates2005

    • 著者名/発表者名
      Khojastehpour, M., Murakami.Y, Hashiguchi.K.
    • 雑誌名

      ICCES'05, Chennai, India, December 1-6 41

      ページ: 2274-2279

    • 関連する報告書
      2005 実績報告書
  • [雑誌論文] Crack tip plasticity in edge-blunt-cracked plates2005

    • 著者名/発表者名
      Khojastehpour, M., Murakami.Y.
    • 雑誌名

      McMat2005, Baton Rouge, Louisiana, USA, June 1-3 Paper No.464

      ページ: 1-6

    • 関連する報告書
      2005 実績報告書
  • [雑誌論文] Plane strain dynamic bifurcation with tangential plasticity2005

    • 著者名/発表者名
      Khojastehpour, M.
    • 雑誌名

      McMat2005, Baton Rouge, Louisiana, USA, June 1-3 Paper No.36

      ページ: 1-6

    • 関連する報告書
      2005 実績報告書
  • [雑誌論文] Plane strain bifurcation with tangential plasticity2005

    • 著者名/発表者名
      Khojastehpour, M., Hashiguchi.K., Murakami.Y.
    • 雑誌名

      Plasticity'05, Kauai, Hawaii, USA, January 3-8

      ページ: 268-270

    • 関連する報告書
      2004 実績報告書
  • [雑誌論文] Axisymmetric bifurcations of metals tangential-subloading surface model2004

    • 著者名/発表者名
      Khojastehpour, M., Hashiguchi.K., Murakami, Y.
    • 雑誌名

      Journal of Applied Mechanics, JSCE 7

      ページ: 527-534

    • 関連する報告書
      2004 実績報告書
  • [雑誌論文] Axisymmetric bifurcation analysis in soils by the tangential-subloading surface model2004

    • 著者名/発表者名
      Khojastehpour, M., Hashiguchi, K.
    • 雑誌名

      Journal of the Mechanics and Physics of solid 52

      ページ: 2235-2262

    • 関連する報告書
      2004 実績報告書
  • [雑誌論文] Plane strain bifurcation analysis of solids by the tangential-subloading surface model2004

    • 著者名/発表者名
      Khojastehpour, M., Hashiguchi.K.
    • 雑誌名

      International Journal of Solids and Structures 41

      ページ: 5541-5563

    • 関連する報告書
      2004 実績報告書
  • [雑誌論文] Axisymmetric bifurcation analysis with tangential plasticity2004

    • 著者名/発表者名
      Khojastehpour, M., Hashiguchi.K., Murakami.Y.
    • 雑誌名

      ICCES'04, Madeira, Portugal, July 26-29

      ページ: 800-805

    • 関連する報告書
      2004 実績報告書
  • [雑誌論文] Localized bifurcation in soils with tangential plasticity2004

    • 著者名/発表者名
      Khojastehpour, M., Hashiguchi.K., Murakami.Y.
    • 雑誌名

      The 39th Japan National Conference on Geotechnical Engineering, Niigata, Japan, July 6-9

      ページ: 1151-1152

    • NAID

      130004621795

    • 関連する報告書
      2004 実績報告書

URL: 

公開日: 2004-04-01   更新日: 2024-03-26  

サービス概要 検索マニュアル よくある質問 お知らせ 利用規程 科研費による研究の帰属

Powered by NII kakenhi