• 研究課題をさがす
  • 研究者をさがす
  • KAKENの使い方
  1. 前のページに戻る

円筒LVLの実用化に関する研究

研究課題

研究課題/領域番号 12556029
研究種目

基盤研究(B)

配分区分補助金
応募区分展開研究
研究分野 林産学
研究機関秋田県立大学

研究代表者

佐々木 光  秋田県立大学, 木材高度加工研究所, 教授 (50027158)

研究分担者 楊 萍  熊本大学, 教育学部, 助教授 (70253705)
山内 秀文  秋田県立大学, 木材高度加工研究所, 助手 (90279513)
岡崎 泰男  秋田県立大学, 木材高度加工研究所, 講師 (70279511)
木村 有一  庄内鉄工(株), 設計室長
片谷 光輝  (株)三立, 研究室長
研究期間 (年度) 2000 – 2001
研究課題ステータス 完了 (2001年度)
配分額 *注記
12,400千円 (直接経費: 12,400千円)
2001年度: 7,000千円 (直接経費: 7,000千円)
2000年度: 5,400千円 (直接経費: 5,400千円)
キーワード木質円筒の製造 / 単板積層材(LVL) / LVL / 円筒LVLの実用化 / 木質建材 / 木質複合丸柱 / LVL composites
研究概要

設計・製作した生産規模の円筒LVLのワインダーを能代市の(有)渡辺事業所に設置し、試験的製造を始めた。秋田県内の新設建物に若干試用することが出来、技術移転を兼ねて企業の技術者と本研究の分担者が協力して製造・納入を行い、実用性を検証した。その内容は次の通り:
1.能代市淳城幼稚園玄関ホール丸柱(基材単板:ラジアータパイン、化粧単板:スギ)
エントランスホールの中央と二階吹き抜け天井部分大黒柱の二本。内腔に鉄筋コンクリートを打ち込むタイプ。共に外径800mmφ、内径640mmφ、壁厚80mmであるが、一本は高さ2,600mm、他は6,300mm。
2.秋田県由利町交流センター回廊丸柱ほか(基材:ラジアータパイン、化粧:スギ)
回廊丸柱6本に円筒LVLを試用。マンドレル用綱管を内蔵したままコンクリートを打ち込んで用いる。外径600mmφ、高さ1,500mm、壁厚465mm。この他に270mmφスギ丸太を芯として、3.5mm厚単板帯を7層(25mm)巻いた外径320mmφ、長さ4,700mm、の複合丸柱を開発して試用.
3.秋田県協和町多目的交流施設外壁柱(基材:カラマツ、化粧:天然秋田スギ)
集成材構造の柱の屋外側化粧に円筒LVLを試用。サイズは、四隅柱部分用として、外径750mmφ、壁厚45.5mm(13プライ)、長さ5,500mmで、縦2/3割りのものを4本。間柱部分用として、外径750kmφ、壁厚45.5mm,長さ5,170km、縦1/3割りのものを22本。
4道の駅リクエスト端末キャビネット(基材:ラジアータパイン、化粧:スギ)
東北地方整備局の道の駅「ふたつい」「やたて峠」に、地域の情報端末機器用キャビネットを円筒LVLで試作。サイズ:外径700mmφ、内径655mmφ、壁厚45mm、長さ1,900mm、各一本。
これらの模擬的製造で製造原価を明らかにし、円筒LVLの実用化が採算性をもつことを検証した.

報告書

(3件)
  • 2001 実績報告書   研究成果報告書概要
  • 2000 実績報告書
  • 研究成果

    (20件)

すべて その他

すべて 文献書誌 (20件)

  • [文献書誌] T.Hata, H.Yamauchi: "Design and Pilot Production of a "Spiral-Winder" for the manufacture of Cylindrical Laminated Veneer Lumber"Journal of Wood Science. 47・(2). 115-123 (2001)

    • 説明
      「研究成果報告書概要(和文)」より
    • 関連する報告書
      2001 研究成果報告書概要
  • [文献書誌] P.Yang, H.Sasakiほか2名: "Fracture Toughness of End-Joint Rein-forcement for Cylindrical LVL"Proc.of the Symposium on Utilization of Agricultural and Forestry Residues, 31 Oct.-3 Nov., 2001 Nanjin, China. 217-222 (2001)

    • 説明
      「研究成果報告書概要(和文)」より
    • 関連する報告書
      2001 研究成果報告書概要
  • [文献書誌] L-F.Ma, H.Yamauchiほか2名: "Fire Retardant Treatment of Wood Veneers for the Production of Cylindrical LVL"Proc.of the Symposium on Utilization of Agricultural and Forestry Residues, 31 Oct.-3 Nov., 2001 Nanjin, China. 328-332 (2001)

    • 説明
      「研究成果報告書概要(和文)」より
    • 関連する報告書
      2001 研究成果報告書概要
  • [文献書誌] H.Sasaki, H.Yamauchiほか2名: "Technology for the Production of Cylindrical LVL"Proc.5th Pacific Rim Bio-Based Composites Symposium, 10-13 Dec., 2000, Canberra, Australia. 215-219 (2000)

    • 説明
      「研究成果報告書概要(和文)」より
    • 関連する報告書
      2001 研究成果報告書概要
  • [文献書誌] P.Yang, H.Sasaki et al.: "Fracture Toughness of Glue Line -Evaluation by experimental and numerical analysis based on block shear test"Proc.of the Third International Wood Science Symposium, 1-2 Nov., 2000, Uji, Kyoto, Japan. 134-139 (2000)

    • 説明
      「研究成果報告書概要(和文)」より
    • 関連する報告書
      2001 研究成果報告書概要
  • [文献書誌] T. Hata, K. Umemura, H. Yamauchi, A. Nakayama, S. Kawai and H. Sasaki: "Design and Pilot Production of a "Spiral-Winder" for the manufacture of Cylindrical Laminated Veneer Lumber"Journal of Wood Science. 47. 115-123 (2001)

    • 説明
      「研究成果報告書概要(欧文)」より
    • 関連する報告書
      2001 研究成果報告書概要
  • [文献書誌] P. Yang, K. Jinno, Y. Ohsako and H. Sasaki: "Fracture Toughness of End-Joint Rein-forcement for Cylindrical LVL"Proc. of the Symposium on Utilization of Agricultural and Forestry Residues, 31. Oct-3 Nov, 2001, Nanjin, China. 217-222 (2001)

    • 説明
      「研究成果報告書概要(欧文)」より
    • 関連する報告書
      2001 研究成果報告書概要
  • [文献書誌] L-F. Ma, H. Yamauchi, O. R. Pulido and H. Sasaki: "Fire Retardant Treatment of Wood Veneers for the Production of Cylindrical LYL"Proc. of the Symposium on Utilization of Agricultural and Forestry Residues, 31. Oct-3 Nov, 2001, Nanjin, China. 328-332 (2001)

    • 説明
      「研究成果報告書概要(欧文)」より
    • 関連する報告書
      2001 研究成果報告書概要
  • [文献書誌] H. Sasaki, H. Yamauchi, L-F. Ma, O.R. Pulido, M. Kataya and H. Kawai: "Technology for the Production of Cylindrical LVL"Proc. 5th Pacific Rim Bio-Based Composites Symposium, 10-13 Dec., 2000, Canberra, Australia. 215-219 (2000)

    • 説明
      「研究成果報告書概要(欧文)」より
    • 関連する報告書
      2001 研究成果報告書概要
  • [文献書誌] P. Yang, H. Sasaki et al: "Fracture Toughness of Glue Line - Evaluation by experimental and numerical analysis based on block shear test"Proc. of the Third International Wood Science Symposium, 1-2 Nov., 2000, Uji, Kyoto, Japan. 1-2 Nov. 134-139 (2000)

    • 説明
      「研究成果報告書概要(欧文)」より
    • 関連する報告書
      2001 研究成果報告書概要
  • [文献書誌] P. Yang, H. Yamauchi, H. Sasaki et al: "Numerical Analysis of Stress Distribution along the Glue Line between Cylindrical LVL Column and its Reinforcement Core for End-Joints"Proc. of the International Conference on Timber Engineering PTEC '99, March 15-20, 1999, Rotorua, New-Zealand. March 15-20. (1999)

    • 説明
      「研究成果報告書概要(欧文)」より
    • 関連する報告書
      2001 研究成果報告書概要
  • [文献書誌] P. Yang, K. Jinno, A. Nishimoto, Y. Ohsako, H. Yamauchi and H. Sasaki: "Improving the Bondability of Injection-Molded Waste paper-Polyethylene Composite"Proc. of the Fourth International Conference on ECOMATERIALS, Nov, 10-12, Gifu, Japan. (1999)

    • 説明
      「研究成果報告書概要(欧文)」より
    • 関連する報告書
      2001 研究成果報告書概要
  • [文献書誌] T.Hata, H.Yamauchi ほか4名: "Design and Pilot Production of a "Spiral-Winder" for the manufacture of Cylindrical Laminated Veneer Lumber"Journal of Wood Science. 47,(2). 115-123 (2001)

    • 関連する報告書
      2001 実績報告書
  • [文献書誌] P.Yang, H.Sasaki ほか2名: "Fracture Toughness of End-Joint Rein-forcement for Cylindrical LVL"Proc. of the Symposium on Utilization of Agricultural and Forestry Residues, 31 Oct.-3 Nov., 2001, Nanjin, China. 217-222 (2001)

    • 関連する報告書
      2001 実績報告書
  • [文献書誌] L-F.Ma, H.Yamauchi ほか2名: "Fire Retardant Treatment of Wood Veneers for the Production of Cylindrical LVL"Proc. Of the Symposium on Utilization of Agricultural and Forestry Residues, 31 Oct.-3 Nov., 2001, Nanjin, China. 328-332 (2001)

    • 関連する報告書
      2001 実績報告書
  • [文献書誌] H.Sasaki, H.Yamauchi ほか2名: "Technology for the Production of Cylindrical LVL"Proc. 5th Pacific Rim Bio-Based Composites Symposium, 10-13 Dec. 2000, Canberra, Australia. 215-219 (2000)

    • 関連する報告書
      2001 実績報告書
  • [文献書誌] P.Yang, H.Sasaki et al.: "Fracture Toughness of Glue Line-Evaluation by experimental and numerical analysis based on block shear test"Proc. of the Third International Wood Science Symposium, 1-2 Nov., 2000, Uji, Kyoto, Japan. 134-139 (2000)

    • 関連する報告書
      2001 実績報告書
  • [文献書誌] 山内秀文,佐々木光 ほか4名: "スパイラルワインディング法による円筒形LVLの製造(第2報)円筒形LVLの製造のための速硬化型樹脂接着剤の検討"木材学会誌. 45(2). 149-156 (1999)

    • 関連する報告書
      2000 実績報告書
  • [文献書誌] 佐々木光: "新材料とその特性について:円筒LVL"平成11年度新材料の特性に対応する木工機械の調査研究報告書(財)日本機械工業連合会. 2-24 (2000)

    • 関連する報告書
      2000 実績報告書
  • [文献書誌] 佐々木光: "「円筒LVL」の技術移転のための資料"秋田県木材加工推進機構技術移転資料. 1-23 (2000)

    • 関連する報告書
      2000 実績報告書

URL: 

公開日: 2000-04-01   更新日: 2016-04-21  

サービス概要 検索マニュアル よくある質問 お知らせ 利用規程 科研費による研究の帰属

Powered by NII kakenhi