| 研究課題/領域番号 |
16F16063
|
|---|
| 研究種目 |
特別研究員奨励費
|
| 配分区分 | 補助金 |
|---|
| 応募区分 | 外国 |
|---|
| 研究分野 |
応用物性
|
|---|
| 研究機関 | 北海道大学 |
|---|
研究代表者 |
O・B Wright 北海道大学, 工学研究院, 教授 (90281790)
|
|---|
| 研究分担者 |
MEZIL SYLVAIN 北海道大学, 工学(系)研究科(研究院), 外国人特別研究員
|
|---|
| 研究期間 (年度) |
2016-04-22 – 2018-03-31
|
| 研究課題ステータス |
完了 (2017年度)
|
| 配分額 *注記 |
2,300千円 (直接経費: 2,300千円)
2017年度: 1,100千円 (直接経費: 1,100千円)
2016年度: 1,200千円 (直接経費: 1,200千円)
|
|---|
| キーワード | Computed tomography / Picosecond ultrasonics / Nanoscale / Imaging |
|---|
| 研究実績の概要 |
The chosen sample for GHz CT testing is a glass fibre containing two holes along the main axis of its cylinder. Our approach is to excite acoustic waves from one side of the sample and to rotate the probe beam on the opposite side to evaluate the propagated acoustic field for various angles (with a fixed pump excitation spot). Then the fibre is rotated along its axis and the operation is repeated.
We realised 3D time-domain acoustic simulations using PZFLex software in a similar geometry. The simulated silica fibre is 5 μm diameter. The two axial air holes of diameter around 1 μm are considered to be vacuum so that no acoustic wave can propagate. This allowed us to demonstrate the detection of both holes with their correct position and also get an estimate of the hole size and shape.
The experimental setup was developed to match the particular needs of controlling probe and sample orientations. The setup has been validated on flat glass, and experiments are still ongoing in order to detect the acoustic signal and experimentally demonstrate acoustic computed tomography down to sub-micrometre scale.
|
| 現在までの達成度 (段落) |
29年度が最終年度であるため、記入しない。
|
| 今後の研究の推進方策 |
29年度が最終年度であるため、記入しない。
|
