| 研究実績の概要 |
Ceramic 45S5 BG (45%SiO2, 24.5%Na2O, 24.5%CaO, and 6%P2O5 by weight) have gained researchers attention as a functional biomaterial due to its bioactive surface and osseointegration ability. It has been approved that BG 45S5 can heal and repair bone damages. Therefore, The sol-gel technique preparation protocol followed to prepare 45S5 BG, by mixing the tetraethylorthosilicate (TEOS, Wako, Tokyo, Japan), nitric acid, triethylphosphate (TEP, Wako, Japan), calcium nitrate tetrahydrate (Wako), sodium nitrate (Wako). The zirconia substrates coated by one-time vacuum sol-dipping method under 0.1 bar pressure dipped for 60 s and dried at 60°C for 1 hour followed by sintering at 1200°C for 1 hour to melt the BG on the surface in a programmable furnace with a heating rate of 10°C/min. The characterizations such as morphology, adhesion test and roughness investigated after BG coating. The SEM images confirmed that 900°C is not enough to melt and cover entire surface therefore 1200°C was applied. Also the Fractography result showed that the thickness of the coating layer is controllable between 5 um to 45 um. The XRD result mentioned the non-crystallin and crystalline BG phase structures.
|
| 今後の研究の推進方策 |
The BG coating, prepared by sol-gel technique, on the rough bead-fused zirconia substrates coated by one-time vacuum sol-dipping method under 0.1 bar pressure and dipped for 60s and sintered at 1200°C for 1 hour will be characterized more. The characterizations such as TEM and adhesion test and roughness will be investigated. Later cell study will be investigated for biological properties.
|
