2001 Fiscal Year Final Research Report Summary
Construction of the evaluation diagnosis system by the optimal design and image analysis of the walked for handicapped person.
Project/Area Number |
12832068
|
Research Category |
Grant-in-Aid for Scientific Research (C)
|
Allocation Type | Single-year Grants |
Section | 一般 |
Research Institution | KURUME NATIONAL COLLEGE Of TECHNOLOGY(K.N.C.T) |
Principal Investigator |
IRIE Kazutaka K.N.C.T GENERAL SCIENCE PROFESSOR, 一般科目理科系(物理), 教授 (50149986)
|
Co-Investigator(Kenkyū-buntansha) |
YAMASAKI Yuji K.N.C.T GENERAL SCIENCE LECTURER, 一般科目理科系(物理), 講師 (00270372)
HIROO Yasuaki K.N.C.T MECHANICAL PROFESSOR, 機械工学科, 教授 (30044275)
YONEKURA Masataka K.N.C.T MECHANICAL PROFESSOR, 機械工学科, 教授 (20044282)
|
Project Period (FY) |
2000 – 2001
|
Keywords | WALKER / IMAGE ANALYSIS OF GATE / ELECTROMYOGRAPH / CAD / CAM |
Research Abstract |
The experimental production that aimed at the mass production of domestically with the function analysis of the walker (Hart Walker) that was developed in England has been studied in succession in 2001 in this research. Followings are the results that were obtained both fiscal years. *Abasic adjustment standard for better gait with the Hart Walker have been obtained from the analyzes of the recorded walking patterns of 50 cases. * As objective guidance for adjusting the Hart Walker will be soon supplied by the digital media CD/R with the image data of the adjustment place of it for making use of the cultivating the therapists. * Obtaining the cooperation of the cases and training institution, 3 dimension image analyzes have been carried out and these accurate analyzes of the gait will be expected to advance the research and develop the Hart Walker. * Regarding the test manufacturing of the Hart Walker, the most of the bad engineering of parts that were pointed out from the developer were improved but some remained to be improved yet. * The design and test manufacturing production of the part that promotes | ; he development of Hart Walker for adult with, the knee joint part was experimentally manufactured by computer assisted design system.
|