2003 Fiscal Year Final Research Report Summary
Design of Decomposition System of Toxic Substances in Exhaust Gases by Microwave-induced Plasma under Atmospheric Pressure
Project/Area Number |
13555221
|
Research Category |
Grant-in-Aid for Scientific Research (B)
|
Allocation Type | Single-year Grants |
Section | 展開研究 |
Research Field |
触媒・化学プロセス
|
Research Institution | Nagasaki University |
Principal Investigator |
SHIMIZU Yasuhiro Nagasaki University, Graduate School of Science and Technology, Department of Materials Science, Associate Professor, 生産科学研究科, 助教授 (20150518)
|
Co-Investigator(Kenkyū-buntansha) |
沢田 明宏 三菱重工業(株), 先進技術研究センター・先進材料グループ, 主席
HYODO Takeo Nagasaki University, Faculty of Engineering, Department of Materials Science and Engineering, Research Associate, 工学部, 助手 (70295096)
EGASHIRA Makoto Nagasaki University, Faculty of Engineering, Department of Materials Science and Engineering, Professor, 工学部, 教授 (60037934)
|
Project Period (FY) |
2001 – 2003
|
Keywords | Microwave-induced Plasma / Porous SiC Ceramics / Nonthermal Plasma inLiquid Phase / Nonthermal Plasma in Gas Phase / Diesel Particulate Matters / NO_x / Treatment of Exhaust Gases / Purification of Environmental Pollutants |
Research Abstract |
The following three subjects have been mainly studied in this project, and the results obtained are summarized below. 1) Control of Microwave-induced Plasma in Liquid Phase and Decomposition of Organic Compounds Behavior of microwave-induced plasmas generated from various ceramic triggers in pure water, dichloroacetic acid (DCAA) and β-naphthol aqueous solution and their abilities for decomposing these organic compounds have been investigated. The use of SiC ceramics or carbon block as a trigger in liquid phase resulted in formation of gaseous CO_2 due to partial decomposition of the trigger itself. In the case of decomposition of DCAA, La_<0.8>Sr_<0.2>CoO_3 was found to be the most suitable trigger from the viewpoints of conversion of DCAA, amounts of partial decomposition products and long-term stability as a trigger. In the case of decomposition of β-naphthol, however, FeSi was superior to other triggers, being accompanied with high ability for decomposing β-naphthol and excellent sta
… More
bility in liquid phase. 2) Control of Microwave-induced N_2 Plasma under Atmospheric Pressure from Various Porous Ceramic Triggers and Improvement of Ability for Decomposing Dioxin-related Compounds Behavior of microwave-induced plasmas generated from various porous ceramic triggers in Ar and N_2 gas flowing and their ability for decomposing monochlorobenzene (MCB) have been investigated. Stable nonthermal plasma could be generated from all the triggers tested in Ar flowing. However, stable plasma could be generated in N_2 flowing only when porous SIC ceramics was employed as a trigger and MCB in N_2 flowing could be decomposed almost completely under the conditions. Therefore, porous ceramics was found to be most suitable structure used as a trigger in gas phase. 3)Improvement of Efficiency for Simultaneous Removal of NO_x and Diesel Particulate Matters by Microwave-induced Plasma Oxidation behavior of diesel particulate matters (DPM) and gas composition have been investigated as a function of microwave power irradiated to DPM-loaded porous SiC ceramics under 0.1% NO -10% O_2 -N_2 flowing. Additional effort has been directed to study the NO_x removal behavior by 1.0 wt% Ir/TiO_2 catalyst placed downstream from the plasma region. The amount of NO_x, formed in the downstream of the plasma region decreased markedly with increasing the microwave power, while the amounts of CO, CO_2 and H2 increased. No NO_x was detected in the effluent gas after the catalyst bet. Thus, draping of DPM by a SiC filter as well as NO, storage by suitable catalysts in the downstream and periodical irradiation of microwave to the filter are considered to be useful for simultaneous reduction of DPM and NO_x contained in the exhaust gas from diesel engine. Less
|
Research Products
(6 results)