2002 Fiscal Year Final Research Report Summary
Theoretical and Experimental Study on Physical Mechanism behind the Formation of Drilling Induced Tensile Wall Fracture (DTF) for Borehole Stabilization
| Project/Area Number |
13650982
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
資源開発工学
|
|---|
| Research Institution | Tohoku University |
|---|
Principal Investigator |
ITO Takatoshi Institute of Fluid Science, Tohoku University, Associate Professor, 流体科学研究所, 助教授 (00184664)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
YAMAMOTO Koji Technology Research Center, Japan National Oil Corp., Project Researcher, 石油開発技術センター, プロジェクト研究員
HAYASHI Kazuo Institute of Fluid Science, Tohoku University, Professor, 流体科学研究所, 教授 (30111256)
|
|---|
| Project Period (FY) |
2001 – 2002
|
| Keywords | Boring / Tensile fracture / Hydraulic fracturing / Thermal stress / Interaction of fractures / Fracture link-up / Laboratory experiment / Hydraulic Nitrogen |
|---|
| Research Abstract |
The advanced logging tools such as FMI and BHTV/UBI tools allow us to see the structure of borehole wall in very detail. The results show that there appear frequently the multiple fractures in an en-echelon pattern on opposite sides of the borehole wall. They are called as the Drilling Induced Tensife Wall Fractures, DTF for short. It is known that they are formed in the borehole wall while drilling, however, it has been not clarified yet how they are formed. In this paper, we investigate the mechanism behind the formation or DTF. To this end, we developed theoreticai models to estimate the critical borehole pressure necessary to initiate inclined fractures at the borehole wall, P_<frac>, and that necessary to link them near the borheole wall, P_<link>. The models are taken into account of thermal stress caused by the difference in temperature of rock and borehole fluid, Dt. Our modeling shows that P_<frac> and P_<link> are changed with borehole orientation, in-situ stresses and Dt. P_<link> can become to be larger than P_<frac> DTF may be observed in such a case. Note that DTF has a small fracture length along the borehole wall suggests a small fracture opening at the borehole wall compared to the opening of large, axial fractures that occur once the small fractures have linked up. If the fracture opening is small, the opening could be sealed with the drilling mud, and significant circulation loss could be prevented. This may be the reason why there was not any indication of lost circulation at the depths where DTF were observed. To verify the present models, laboratory experiments were performed on the PMMA cubical specimens under biaxial compressions. The specimens are transparent, and it allows us to see directly the fracture formation on borehole wall. The borehole was cooled down by injection of liquid nitrogen, and the cooling caused thermal tensile stress to induce DTF on the borehole wall. The experimental results agree well with the model prediction.
|
Research Products
(2 results)
