2004 Fiscal Year Final Research Report Summary
Development of Performance-based design code and Structural Performance for Modern Timber Bridges used Glulam
| Project/Area Number |
14550487
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
構造工学・地震工学
|
|---|
| Research Institution | Kanazawa Institute of Technology |
|---|
Principal Investigator |
HONDA Hideyuki Kanazawa Institute of Technology, College of Environmental Engineering and Architecture, Professor, 環境・建築学部, 教授 (00110990)
|
|---|
| Project Period (FY) |
2002 – 2004
|
| Keywords | modern timber bridges / field test / structural analysis / vibration characteristics / evolution of rigidity / impact factor / vibration serviceability / 3 dimensional dynamic response analysis |
|---|
| Research Abstract |
The matters, which are clarified in the performance of this study, are as follows.
1. By the collection of actual bridge test data for 6 modern timber bridges of the timber roadway bridges and the timber pedestrian bridges, this study clarified the structural performance on dynamic characteristics. Furthermore, it was conformed that impact factor was adopted the value of safe side, and there is especially no problem on vibration serviceability from understanding of the actual condition of the vibration of timber pedestrian bridge.
2. As a result of investigating the application method to dynamic response factor in the Performance-based design code, it could present the performance type-impact factor code, which is reduced by span length.
3. This study was investigated the three-dimensional dynamic response analysis of timber the highway bridge due to moving vehicles. As that result, it was constructed the dynamic response analysis method with the high accuracy between measured and analyzed vibration behavior values.
4. The three-dimensional dynamic response analysis method of modern timber pedestrian bridge in which the pedestrian runs was formulated. In the analysis case of through arch timber pedestrian bridge, some differences have produced at analytic value and maximum value of experiment responsive wave shape, and that the accuracy of the analytic value is raised. That leaves as future problem.
The performance code suitable performance-based design method of modern timber bridges was developed based on dynamic characteristic and structural performance when the synthetic and uniform structure performance was clarified.
|
Research Products
(45 results)
