2004 Fiscal Year Final Research Report Summary
Study on Educational MC and CAD/CAM for Technological Education
| Project/Area Number |
14580199
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Science education
|
|---|
| Research Institution | Oita University |
|---|
Principal Investigator |
IKEZAKI Yatsuo Oita University, Faculty of Education and Welfare Science, Assistant professor, 教育福祉科学部, 助教授 (70136571)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
MAKINO Harutosi Oita University, Faculty of Education and Welfare Science, Assistant professor, 教育福祉科学部, 助教授 (30165683)
|
|---|
| Project Period (FY) |
2002 – 2004
|
| Keywords | MC / Mini milling machine / Stepping motor / Table |
|---|
| Research Abstract |
The MC main part portion for education purchased the mini milling machine, and converted this using a drill press, an existing lathe, an existing milling.
In reconstruction, MC fully cuts wood, and a plastic and metal. MC was taken as the structure of giving high rigidity.
Moreover, 5 phases stepping motor was adopted so that high output could be borne.
Furthermore, for improvement in workability or safety, sending of the X-axis and the Y-axis table and the Z-axis for tool sending were converted so that it could carry out by both automatic sending of stepping motor control with a personal computer, and manual sending by a handle. Complete parts were altogether manufactured except for the main part and 5 phases stepping motor using a drill press, a lathe, and milling machine, etc. When producing the same equipment, it is possible to also manufacture laboratories and occupation high schools, such as a university of what, without using a special machine tool. Next, software for evaluation was developed. Control software which operates the converted main part is made into budget prices. The function near actual MC is included, Moreover, the actual machining centre aiming at developing what can perform educational practice must generate the processing data which operates. Then, with the processing data obtained from the control software for evaluation developed this time, when it was actually processed in the established machining centre, obtaining the processing data which can control the machining centre for production was checked.
|
Research Products
(8 results)
