2005 Fiscal Year Final Research Report Summary
Study of Bearingless Motor with Rectifier Circuit Coil
| Project/Area Number |
15360128
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Dynamics/Control
|
|---|
| Research Institution | Kochi University of Technology |
|---|
Principal Investigator |
OKA Koichi Kochi Univ. of Technology, Fac. of Intelligent Mechanics Engineering, Associate Professor, 工学部, 助教授 (10160649)
|
|---|
| Project Period (FY) |
2003 – 2005
|
| Keywords | rectifier circuit coil / induced current / bearingless motor / magnetic bearings / alternative magnetic fields |
|---|
| Research Abstract |
In this research a novel type of bearingless motor was proposed and developed. Bearingless motors are classified as actuators whose generating mechanisms for driving and bearing force are combined. The feature of the proposed bearingless motor is having a rotor with rectifier circuit coils. The rectifier circuit coils can magnetize the rotor in a fixed direction by one-way induced current. In this research, we carried out as follows.
1.The feasibility of the proposed bearingless motor on the point of one-way magnetization was examined by simulations and examinations. As the result, we can verify the construction of the proposed bearingless motor.
2.First prototype bearingless motor was made and examined. The motor is a radial magnetization type and the teeth of the rotor and the stator have rectangular shape. As the results of examinations this prototype fails in generating enough torque and forces because of luck of induced magnetization.
3.FEM analysis were carried out for the construction of the bearingless motor. As the results, the teeth shape of the rotor and stator must be made more wide at the part facing each other. We calculated proper width of the teeth for rotating and levitating considering i) obtain more large torque, ii) reducing the impact of rotor angle for torque and force.
4.The second prototype bearingless motor was made. The levitation examination were succeeded. Now we examine the performance of rotation and levitation when the rotor rotates.
5.As the further study, we must made up the bearingless motor and examine the performance. In addition to this examination, we will make another type of bearingless motor, the axial magnetization type.
|
Research Products
(11 results)
