2016 Fiscal Year Final Research Report
Development and Evaluation of Infiltration Technique for Controlling Electrode Microstructures of Solid Oxide Fuel Cells
Project/Area Number |
15H06321
|
Research Category |
Grant-in-Aid for Research Activity Start-up
|
Allocation Type | Single-year Grants |
Research Field |
Thermal engineering
|
Research Institution | Kyoto University |
Principal Investigator |
|
Project Period (FY) |
2015-08-28 – 2017-03-31
|
Keywords | 固体酸化物形燃料電池 / 熱工学 / 多孔質 / 含浸法 |
Outline of Final Research Achievements |
The ability of the infiltration technique to control microstructures of solid oxide fuel cell anodes has been investigated to achieve desirable porous microstructures that can enhance anode performance. Characteristics of the infiltrated Ni-YSZ anodes were investigated using electrochemical and 3D microstructural analysis. The anodes fabricated by infiltration based on thermal decomposition and electrodeposition exhibited superior performance than the conventional anodes. This can be attributed to the increased active reaction site density owing to the smaller metal Ni particles. On the other hand, the anodes fabricated by infiltration based on electroless deposition did not show sufficient electrochemical activity. This is due to the inhomogeneous distribution of the deposited Ni particles, which indicates controlling deposition rate is important to achieve desirable anode microstructures.
|
Free Research Field |
熱工学
|