2006 Fiscal Year Final Research Report Summary
Development of xenobiotic analysis system for safe reuse of wood-based materials
| Project/Area Number |
17550144
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Environmental chemistry
|
|---|
| Research Institution | Akita Prefectural University |
|---|
Principal Investigator |
YAMAUCHI Shigeru Akita Prefectural University, Institute of Wood Technology, Professor, 木材高度加工研究所, 教授 (30279509)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
KAWAI Yasuo Akita Prefectural University, Institute of Wood Technology, Associate Professor, 木材高度加工研究所, 准教授 (80279512)
SHIBUTANI Sakae Akita Prefectural University, Institute of Wood Technology, Post-doctoral fellow, 木材高度加工研究所, 流動研究員
|
|---|
| Project Period (FY) |
2005 – 2006
|
| Keywords | reuse / wood-based material / safety / xenobiotic analysis / Raman spectroscopy / infrared spectroscopy / microanalysis |
|---|
| Research Abstract |
From the viewpoint of environment protection and forest saving, there has been recently a global tendency to reconsider development of wood-based materials. Effective utilization of thinnings, bark or waste wood has been studied widely. Above all, reuse of construction waste wood is an important point. Thus, it is essential for safe reuse to detect foreign materials in wood because foreign materials are often hazardous or toxic chemicals.
For the purpose of establishing an easy and quick xenobiotic analytical method, we investigated the characteristics in wood analysis of Raman, infrared, X-ray fluorescence spectroscopy, etc., and proposed an analytical system for wood-based materials including no wet processes by a combination of these analytical techniques. The system is as follows.
First, Raman or infrared measurements for waste wood are performed in order to detect adhesives, preservatives, or paints. When xenobiotics are found in waste wood, they are identified and further investigated the distribution by microscopic spectroscopy. Volatile organic compounds are quantified by gas chromatography if formaldehyde resin was used. When inorganic compounds are expected to be included in woody materials, we analyze elementally the materials by X-ray fluorescence spectrometry.
Our analytical system has not come in practice yet. We are currently improving the system for the sake of downsizing and simplification
|
Research Products
(6 results)
