1993 Fiscal Year Final Research Report Summary
Expert systems for designing pneumatic conveying line
| Project/Area Number |
04555044
|
|---|
| Research Category |
Grant-in-Aid for Developmental Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Research Field |
Fluid engineering
|
|---|
| Research Institution | Osaka University |
|---|
Principal Investigator |
TSUJI Yutaka Osaka Univ., Mech.Eng., Prof., 工学部, 教授 (10029233)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
KAWAGUCHI Toshihiro Osaka Univ., Mech.Eng., Assist., 工学部, 助手 (80234045)
TANAKA Toshitsugu Osaka Univ., Mech.Eng., Assist., 工学部, 助手 (90171777)
YOSHIOKA Muneyuki Osaka Univ., Mech.Eng., A.Prof., 工学部, 助教授 (10029267)
|
|---|
| Project Period (FY) |
1992 – 1993
|
| Keywords | Pneumatic conveying / Pressure drop / Numerical calculation |
|---|
| Research Abstract |
Papers of pneumatic conveying published in various journals have been collected and their data have been examined. While powder properties which are important factors affecting transport characteristics are not satisfactorily documented in most papers, it was found that conditions of pipes like diameter and length and transport characteristics such as flow rate and pressure drop have been well documented. Based on the examination of these data, structure of database was decided and a prototype of database was made. Various search programs were made and a method using previous data efficiently was shown.
Next year, computer programs were made which enable one to obtain pressure drops and particle velocity for various conditions of transport. The equations of particle motion are numerically integrated along the pipe in the programs. The programs cope with various pipe line configuration such as straight pipe and bends. If the transport pipeline is not very long, gas is treated as an incompressible fluid. When the transport line becomes long, change of gas properties can not be neglected due to the change of pressure. The programs take these changes into account. Given particle size, density, transport quantity per time and pipe length, an optimal pipe size and gas velocity are determined.
|
