1997 Fiscal Year Final Research Report Summary
IN-SITU MEASUREMENT SYSTEM OF SURFACE MAGNETO-OPTICAL EFFECT FOR HIGH-DENSITY MAGNETO-OPTICAL RECORDING MEDIA
| Project/Area Number |
07555007
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (A)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 展開研究 |
|---|
| Research Field |
表面界面物性
|
|---|
| Research Institution | NAGOYA UNIVERSITY |
|---|
Principal Investigator |
IWATA Satoshi NAGOYA UNIVERSITY,DEPT.ELECTRONICS,ASSOCIATE PROFESSOR, 工学研究科, 助教授 (60151742)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
YU Xiangyou NAGOYA UNIVERSITY,DEPT.ELECTRONICS,RESEARCH ASSOCIATE, 工学研究科, 助手 (40262860)
TSUNASHIMA Shigeru NAGOYA UNIVERSITY,DEPT.ELECTRONICS,PROFESSOR, 工学研究科, 教授 (80023323)
|
|---|
| Project Period (FY) |
1995 – 1997
|
| Keywords | MAGNETO-OPTICAL RECORDING / MAGNETO-OPTICAL EFFECT / SURFACE MAGNETISM / SURFACE MAGNETIC ANISOTROPY / ULTRA-THIN FILM / DIELECTRIC TENSOR / KERR ROTATION / ORDERED ALLOY |
|---|
| Research Abstract |
The preparation system of metallic superlattices and in-situ measurement system of surface magneto-optical effects are constructed and the various magneto-optical materials are investigated by using the systems. In this project, we studied following materials ; (1) Au-Co non-equilibrium alloy films, (2) PtCo ordered alloys with CuPt type, (3) noble metal/Co/noble metal sandwiched films, (4) MnPt_3 ordered alloy films, (Mn_<1-X>Fe_X) Pt_3 and (Mn_<1-X>Co_X) Pt_3 ordered alloy films, (5) MnPt_3/Co and MnPt_3/Copt_3 superlattices and (6) rare earth-transition metal amorphous films. Pt_<50>Co_<50> alloy films were grown by MBE method onto heated MgO (100) and (111) substrates. It is found that the film with CuPt type structure is grown onto (111) substrate at a temperature of 300ﾟC.Whereas, the crystal structure of the films grown onto (111) substrate at 500ﾟC and onto (100) substrate at 300ﾟC and 400ﾟC becomes PtCo ordered phase with AuCu structure. The film of the CuPt type exhibits a very large perpendicular magnetic anisotropy of 1.0*10^6J/m^3, due to the layred structure along the film normal direction. The spectra of Kerr rotation rheta_k of the film with CuPt structure is considerably different from that of AuCu structure, which does not exhibit a maximum around 4.0eV but takes a peak at 1.4eV.
|
Research Products
(34 results)
